Interesting stuffs

Speed up ur Firefox Mozilla

2009-10-17T23:56:00.000-07:00

Firefox web browser has been charged by your favorite friendly, ability to secure it. Here are 2 small tips help you to speed up Firefox over 10 times than normal.

1. The first way, you type commands about:config to the address bar of Firefox and press Enter. Then, roll the mouse down and to the following components and change the settings of it: (To find you can type value in Filter address bar)

- Double click to change the value of network.http.proxy.pipelining to True

- Double click to change the value of network.http.pipelining to True
- Assign a network.http.pipelining.maxrequests on any number, such as 30. This means Firefox will try to answer the 30 commands (requests) at the same time.

- Finally, right-click on any positions on the page and select New valueInterger. Then assigned to its name: nglayout.initialpaint.delay and assign the value 0 for it. This value is the mean time the browser wait before making imperatives are received. ->

2. The second way, users can set up for Internet ADSL.

How?

First, you type commands about: config to the address bar of Firefox and press Enter. Then, you find the ingredients below to change the settings:
- Assign values of network.http.pipelining.maxrequests to 100. (Right click and choose Modify)
- Assign values of network.http.max-connections to 64
- Change the value of network.http.proxy.pipelining to True
- Assign values of network.http.max-persistent-connections-per-server8 to
- Change the value of network.http.pipelining to True

- Assign values of network.http.max-connections-per-server to 21
Finally, you must click on the page and select New-> Integer. Next, you set the name to nglayout.initialpaint.delay and assigned value of 0.

Ok, done! Wish you success and starting your adventure to Internet with Firefox.

Boot your PC in less than 10 seconds

2009-07-24T23:40:00.000-07:00

So you came here to see how to bootup your PC in 10 seconds lesser? Well, you have come to the right place. To a daily user, shaving that extra few seconds for booting up can go a long way. Before I proceed, may I ask for you to backup your data and registry first just to be safe. You are warned, use with caution.

How to bootup computer in 10 seconds lesser?

1) Press Windows Key and "R" to launch the run command.

2) Type "regedit" inside the input space.

3) Navigate to the registry key

HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex

4) Locate the key"Startup Delay" and double click on it.

5) Select Decimal, and change the value to 40000

Enjoy the reduction in startup time and I look forwarding to hearing good news from all of you.

2009-07-21T10:34:00.001-07:00

there’s no replacement for the *nix shell for network based computing tasks, but Micro$oft still has its roots deep . For those who find working via the GUI meclancholy, here’s a list of DOS commands you might want to try out on your Windows machine. This can be useful for hackers, or anyone interested in churning out more information from the network.

ADDUSERS Helps Add or list users to/from a CSV file
ARP Address Resolution Protocol
ASSOC Change file extension associations
ASSOCIAT One step file association
AT Schedule a command to run at a later time
ATTRIB Change file attributes

BOOTCFG Edit Windows boot settings
BROWSTAT Get domain, browser and PDC info

CACLS Change file permissions
CALL Call one batch program from another
CD Change Directory - move to a specific Folder
CHANGE Change Terminal Server Session properties
CHKDSK Check Disk - check and repair disk problems
CHKNTFS Check the NTFS file system
CHOICE Accept keyboard input to a batch file
CIPHER Encrypt or Decrypt files/folders *
CleanMgr Automated cleanup of Temp files, recycle bin
CLEARMEM Clear memory leaks
CLIP Copy STDIN to the Windows clipboard.
CLS Clear the screen
CLUSTER Windows Clustering
CMD Start a new CMD shell
COLOR Change colors of the CMD window
COMP Compare the contents of two files or sets of files
COMPACT Compress files or folders on an NTFS partition
COMPRESS Compress individual files on an NTFS partition
CON2PRT Connect or disconnect a Printer
CONVERT Convert a FAT drive to NTFS.
COPY Copy one or more files to another location
CSVDE Import or Export Active Directory data

DATE Display or set the date
Dcomcnfg DCOM Configuration Utility
DEFRAG Defragment hard drive
DEL Delete one or more files
DELPROF Delete NT user profiles
DELTREE Delete a folder and all subfolders
DevCon Device Manager Command Line Utility
DIR Display a list of files and folders
DIRUSE Display disk usage
DISKCOMP Compare the contents of two floppy disks
DISKCOPY Copy the contents of one floppy disk to another
DNSSTAT DNS Statistics
DOSKEY Edit command line, recall commands, and create macros
DSADD Add user (computer, group..) to active directory
DSQUERY List items in active directory
DSMOD Modify user (computer, group..) in active directory

ECHO Display message on screen
ENDLOCAL End localisation of environment changes in a batch file
ERASE Delete one or more files
EXIT Quit the CMD shell
EXPAND Uncompress files
EXTRACT Uncompress CAB files

FC Compare two files
FDISK Disk Format and partition
FIND Search for a text string in a file
FINDSTR Search for strings in files
FOR Loop command: all options Files, Directory, List
FORFILES Batch process multiple files
FORMAT Format a disk
FREEDISK Check free disk space (in bytes)
FSUTIL File and Volume utilities
FTP File Transfer Protocol
FTYPE Display or modify file types used in file extension associations

GLOBAL Display membership of global groups
GOTO Direct a batch program to jump to a labelled line

HELP Online Help
HFNETCHK Network Security Hotfix Checker

IF Conditionally perform a command
IFMEMBER Is the current user in an NT Workgroup
IPCONFIG Configure IP

KILL Remove a program from memory

LABELEdit a disk label
LOCAL Display membership of local groups
LOGEVENT Write text to the NT event viewer.
LOGOFF Log a user off
LOGTIME Log the date and time in a file

MEM Display memory usage
MD Create new folders
MODE Configure a system device
MORE Display output, one screen at a time
MOUNTVOL Manage a volume mount point
MOVE Move files from one folder to another
MOVEUSER Move a user from one domain to another
MSG Send a message
MSIEXEC Microsoft Windows Installer
MSINFO Windows NT diagnostics
MSTSC Terminal Server Connection (Remote Desktop Protocol)
MUNGE Find and Replace text within file(s)
MV Copy in-use files

NET Manage network resources
NETDOM Domain Manager
NETSH Configure network protocols
NETSVC Command-line Service Controller
NBTSTAT Display networking statistics (NetBIOS over TCP/IP)
NETSTAT Display networking statistics (TCP/IP)
NOW Display the current Date and Time
NSLOOKUP Name server lookup
NTBACKUP Backup folders to tape
NTRIGHTS Edit user account rights

PATH Display or set a search path for executable files
PATHPING Trace route plus network latency and packet loss
PAUSE Suspend processing of a batch file and display a message
PERMS Show permissions for a user
PERFMON Performance Monitor
PING Test a network connection
POPD Restore the previous value of the current directory saved by PUSHD
PORTQRY Display the status of ports and services
PRINT Print a text file
PRNCNFG Display, configure or rename a printer
PRNMNGR Add, delete, list printers set the default printer
PROMPT Change the command prompt
PsExec Execute process remotely
PsFile Show files opened remotely
PsGetSid Display the SID of a computer or a user
PsInfo List information about a system
PsKill Kill processes by name or process ID
PsList List detailed information about processes
PsLoggedOn Who’s logged on (locally or via resource sharing)
PsLogList Event log records
PsPasswd Change account password
PsService View and control services
PsShutdown Shutdown or reboot a computer
PsSuspend Suspend processes
PUSHD Save and then change the current directory

QGREP Search file(s) for lines that match a given pattern.

RASDIAL Manage RAS connections
RASPHONE Manage RAS connections
RECOVER Recover a damaged file from a defective disk.
REG Read, Set or Delete registry keys and values
REGEDIT Import or export registry settings
REGSVR32 Register or unregister a DLL
REGINI Change Registry Permissions
REM Record comments (remarks) in a batch file
REN Rename a file or files.
REPLACE Replace or update one file with another
RD Delete folder(s)
RDISK Create a Recovery Disk
RMTSHARE Share a folder or a printer
ROBOCOPY Robust File and Folder Copy
ROUTE Manipulate network routing tables
RUNAS Execute a program under a different user account
RUNDLL32 Run a DLL command (add/remove print connections)

SCService Control
SCHTASKS Create or Edit Scheduled Tasks
SCLIST Display NT Services
ScriptIt Control GUI applications
SET Display, set, or remove environment variables
SETLOCAL Control the visibility of environment variables
SETX Set environment variables permanently
SHARE List or edit a file share or print share
SHIFT Shift the position of replaceable parameters in a batch file
SHORTCUT Create a windows shortcut (.LNK file)
SHOWGRPS List the NT Workgroups a user has joined
SHOWMBRS List the Users who are members of a Workgroup
SHUTDOWN Shutdown the computer
SLEEP Wait for x seconds
SOON Schedule a command to run in the near future
SORT Sort input
START Start a separate window to run a specified program or command
SU Switch User
SUBINACL Edit file and folder Permissions, Ownership and Domain
SUBST Associate a path with a drive letter
SYSTEMINFO List system configuration

TASKLIST List running applications and services
TIME Display or set the system time
TIMEOUT Delay processing of a batch file
TITLE Set the window title for a CMD.EXE session
TOUCH Change file timestamps
TRACERT Trace route to a remote host
TREE Graphical display of folder structure
TYPE Display the contents of a text file

USRSTAT List domain usernames and last login

VER Display version information
VERIFY Verify that files have been saved
VOL Display a disk label

WHERE Locate and display files in a directory tree
WHOAMI Output the current UserName and domain
WINDIFF Compare the contents of two files or sets of files
WINMSD Windows system diagnostics
WINMSDP Windows system diagnostics II
WMIC WMI Commands

XCACLS Change file permissions
XCOPY Copy files and folders

This list is not exhaustive . Most commands will work well, however please don’t fume up as some of these might not work on your machine due to version dependencies

2009-07-21T09:35:00.000-07:00

Hide ur folder with command prompt : must see

HereZ Da TriCk tO HiDe FolDErS uSinG coMManD proMT :

1.start "run"

2.type "cmd" hit enter

3.after cd.. type ur path with "attrib" command

like

to hide

c:\> attrib +s +h [folder name]

to show

c:\> attrib -s -h [folder name]

you done!!!

2009-07-21T09:24:00.000-07:00

To manually put your computer into hibernation

You must be logged on as an administrator or a member of either the Administrators or Power Users group in order to complete this procedure. If your computer is connected to a network, network policy settings might also prevent you from completing this procedure.

1.Open Power Options in Control Panel. (Click Start, click Control Panel, and then double-click Power Options.)

2.Click the Hibernate tab, and then select the Enable hibernate support check box.

If the Hibernate tab is not available, your computer does not support this feature.

3.Click OK to close the Power Options dialog box.

4.Click Start, and then click Shut Down. In the What do you want the computer to do drop-down list, click Hibernate.

If you are using Windows XP Home Edition, or Windows XP Professional with Fast User Switching turned on, the Shut Down menu will present the options to Stand By, Turn Off, or Restart your computer. Hold down the Shift key, and the Stand By button will change to Hibernate. ..!!..!!

Adding Safe Mode to Your Boot up Screen

2009-07-21T09:22:00.000-07:00

Add a Safe Mode option to the Boot menu in Windows

Follow these steps to add a Safe Mode option to the Boot menu.

When you're experiencing a problem with Windows XP, you may need to boot the system into Safe Mode more than once. However, doing so can be a tiresome process. When the Boot menu appears, you must press [F8], and then you must select Safe Mode from yet another menu.

Wouldn't it be nice if Safe Mode were available from the Boot menu? In fact, it's relatively easy to add a Safe Mode option to the Boot menu. ..!!..;s

follow these steps--
1. Press [Windows][Break] to open the System Properties dialog box.
2. On the Advanced tab, click the Settings button in the Startup And Recovery section.
3. In the System Startup section, click the Edit button.
4. When the Boot.ini file opens in Notepad, locate the line that ends with the /fastdetect switch.
5. Highlight and copy that line and paste it in the line below.
6. Change the section on the line that reads WINDOWS="Mcft Windows XP Professional" to WINDOWS="Safe Mode."
7. Add the following to the end of the line:
/safeboot:minimal /sos /bootlog

Sensational Trick part 1

2009-07-21T09:14:00.000-07:00

In this block i will show you how to display a message on your computer before Windows XP loads. Very useful when the owner of the computer wants to define some rules for using the system that an user must read before...!!..;s

1. Go to Start->Run.

2. On the Run window type regedit and press Enter.

2.Navigate to the key HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Windows NT\CurrentVersion\Winlogon.

3.Modify the key legalnoticecaption and write the name of the window you want to appear.

4.Modify the key legalnoticetext with what you want the window to say.

5.Restart your computer. ..!!..;s

2009-07-09T05:47:00.000-07:00

Create a Hidden User Account

This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it's necessary to use the Log On To Windows dialog box similar to the one in Windows 2000 i.e. press CTRL+ALT+DEL twice.

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon\SpecialAccounts\UserList

Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]

Exit Registry / Reboot

While the account is hidden on the Welcome screen, note that the account profile will be visible in C:\Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups.

E-mail Tracking

2009-07-08T12:54:00.000-07:00

If you ever wondered whether mails you sent ever gets read or just sent to trash, you can use a mail tracking service like MailTracking.com which allows email tracking.
They send you a email notification whenever the recipient reads your email. Notification includes many details including following…
* Date and time opened
* Location of recipient (per their ISP city /town)
* How long the email was read for
* How many times your email was opened
* If your email was forwarded, or opened on a different computer

Now how to use this service in simplest way…

Create an account with them first.
Then next time, whenever you send mail to abc@xyz.com just add .mailtracking.com to the email address. So in this case email address will become abc@xyz.com.mailtracking.com
Now whenever abc@xyz.com read your email, you will receive notification mail from mailtracking.comHow it works…
* Basically the change in email address will route email through mailtracking.com' server.
* They add a small (around 3×3 pixel) white image which is almost invisible to human eyes in email body. The image will be hosted on mailtracking servers and a unique image is kept for each email message.
* So when someone opens email that image also get downloaded. Now mailtracking server logs the browser request for image (note that the request goes in background) and thus can mail you details which mentioned above.

Note:MailTracking.com is not free. You can start with free account as I did. You get 25 credits(1 credit = 1 email) in free account.
Till then enjoy
N Happy Surfing………!!!!!!!!!!!

How to use a trial software forever legally

2009-07-08T12:42:00.001-07:00

Now we download stuff almost daily. New products pop out so often. You can use any software forever you want. You can download trial version, right. Trial version expires after some days. You can stop that expiration. You can tell trial version of the software to not count days or do not bother about time. The software will stay and keep working like original software forever and will not expire or cease to work. You do not have to change your system clock. This little software does it all.

Time Stopper is the software which can stop the time for try out version software. When you stop the time you can use your try-out versions forever. When you stop the time of a try-out version using this Time Stopper it works via this Time Stopper. Real time and date run normally on your system. You can use any number of try-out version softwares with this software.

How it Works

1. Open Time Stopper
2. Browse and select .exe of required trial software
3. Choose the new date (Any date which occurs in between your trial software time period before expiration, suggestion: set it to two days before trial software expiration date.)
4. Choose any time
5. Click open software on your selected date

If you wish to create an icon for your modified trial software and do not want to open Time stopper every time then use last button in software to create new icon. open that trial software after that from that newly created icon always otherwise it can expire.

This is 100% free and 100% legal!!

Download
http:// files.getdropbox. com/u/657816/Programs/TS2.zip
Remove spaces in link

2009-07-07T05:21:00.001-07:00

Restrict PC Shutdown

* Type gpedit.msc in run dialog box [ WIN KEY + R ]
* This will open Group Policy Editor. Now there are two things in it, Computer Configuration and User Configuration
* Click on User Configuration > Administrative Templates > Start Menu and Task Bar
* Now look for “remove and prevent access to shutdown command”
* Double Click and Enable it.
* Exit the group policy editor.

This setting removes the Shut Down option from the Start menu and disables the Shut Down button on the Windows Security dialog box, which appears when you press CTRL+ALT+DEL. This setting prevents users from using the Windows user interface to shut down the system.

Now if you try to shutdown by clicking on start , the shutdown button must have disappeared. Moreover check the task manager and you will find all shutdown,restart and others disabled except switch user.

2009-07-06T09:46:00.001-07:00

Top Tricks n Cheats

This Is crazy!!

Updated 14/Jan/07
keep checking

For New Updates Jump to our Home Page
Click here

Set Processes Priority

Follow this tip to increase the priority of active processes, this will result in prioritisation of processes using the CPU.

CTRL-SHIFT-ESC

1.Go to the second tab called Processes, right click on one of the active processes, you will see the Set Priority option

2.For example, your Run your CDwriter program , set the priority higher, and guess what, no crashed CD’s

Shutdown Trick !

Imidiate rapid shut down window
while shutting down window. open task manager(Ctr+Alt+Del),
Select shut down tab. and press ' Ctrl ' key while select Turn Off from dis tab.
Count 5 4 3 2 1 Voila!!! U r window will rapidly shut down.

Speed Up Ur Shut down !!

Start Regedit.
Navigate to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control.
Click on the "Control" Folder.
Select "WaitToKillServiceTimeout"
Right click on it and select Modify.
Set it a value lower than 2000 (Mine is set to 200).

and !

Like previous versions of windows, it takes long time to restart or shutdown windows xp when the "Exit Windows" sound is enabled. to solve this problem you
must disable this useless sound. click start button then go to settings -> control panel -> Sound,Speech and Audio devices -> Sounds and Audio Devices -> Sounds, then under program events and windows menu click on "Exit Windows" sub-menu and highlight it.now from sounds you can select,choose "none" and then click apply and ok. now you can see some improvements when shutting down your system.

**new **

Crazy !!

Hide ur folders.. never known trick !!!!!!!!!! Disguise them to "Recycle Bin"

Rename any folder with extension {645FF040-5081-101B-9F08-00AA002F954E}
eg,
if u've a folder games
press F2,
then type, "games.{645FF040-5081-101B-9F08-00AA002F954E}"
c the magic....
then 2 get to original form,
remove the extension using
"ren games.{645FF040-5081-101B-9F08-00AA002F954E} games" in dos or as a bat file

n u are done..

~cheers~

System information

system up time only for xp professional edition
It boasts how long it can stay up. Whereas previous
versions of Windows were coy about how long they went
between boots, XP is positively proud of its stamina.
Go to the Command Prompt in the Accessories menu from
the All Programs start button option, and then type
'systeminfo'. The computer will produce a lot of
useful info, including the uptime. If you want to keep
these, type 'systeminfo > info.txt'. This creates a
file called info.txt you can look at later with
Notepad. (Professional Edition only).

lock pc just by double clicking mouse

You can lock your XP workstation with two clicks of
the mouse. Create a new shortcut on your desktop using
a right mouse click, and enter 'rundll32.exe
user32.dll,LockWorkStation' in the location field.
Give the shortcut a name you like. That's it -- just
double click on it and your computer will be locked.
And if that's not easy enough, Windows key + L will do
the same.

SPEED UP UR ACROBAT READER (ALMOST LIKE NOTEPAD)

Do u get irritated when acrobat reader takes 5/10 seconds to load when you want to open a pdf document. There is a way to speed up the loading.

1. Go to the installation folder of acrobat reader
(C:\program files\adobe\acrobat\reader\.. whatever)

2. Move all the files and folders from the "plugins" directory to the "Optional" directory. (I repeat.. cut and paste the files NOT copy & paste).

Also make sure that acrobat reader is not open else it will lock the files and not allow you to move the files).

Now your acrobat reader will load very fast
and almost as good as notepad..

Remove Stored username and Passwords !

To remove the Stored User Names and Passwords from your system, try this:
Click Start, Run and type Control keymgr.dll
Remove the entries from the list.
The other ways to access this dialog are:
Type Control Userpasswords2 in RUN box, click Advanced, Manage Passwords
-or-
From Control Panel, select your User Account, click Manage your network passwords

It Works

~ Cheers ~

*

Remove the Username and picture from Windows XP New Start Menu

The User account picture can be removed by turning off the Welcome Screen. Or, by switching to Windows Classic theme. Follow the method described in this article if you want to remove the username and picture from the Start Menu, without disabling the Welcome Screen and Windows XP Theme.

For those who want to remove the user name and user account picture from Start Menu, in order to have a blank blue panel at the top, try this:
Start Windows Explorer and go to this folder:

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures

From that folder, rename the BMP file which corresponds to your user account.
( For example, if your username is Robert, rename Robert.bmp to old_Robert.bmp )
Next, rename the following folder:

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures\Default Pictures

to something else, say...

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures\No_Default Pictures
To remove the user name, follow these steps

Start regedit.exe and navigate to the this key:

HKEY_CURRENT_USER \ Software \ Microsoft\ Windows \ CurrentVersion \ Policies \ Explorer
In the right-pane, set NoUserNameInStartMenu value-data to 1

Close Regedit.exe and restart Windows.

You'll end up with a blue space at the top of the Start Menu.

To get back the username and the picture, reverse the above procedure.

For the New Start Menu, Windows XP looks for the .bmp file in the folder

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures

If the file is not found, it takes a picture from the "Default Pictures" sub-folder. By renaming the .bmp and the "Default Pictures" folder, you're giving no chance for Windows to fetch an image for the Start Menu

~ Cheers ~.

Notepad Trick ! for complete list move to NOTEPAD TRICKS page !!

Well quite old but here is d complete collection

Step 1: Open Notepad
Step 2: Write following line in the notepad.
this app can break
Step 3: Save this file as xxx.txt
Step 4: Close the notepad.
Step 5: Open the file again.

Voilla!!

or

1> Open Notepad
2> Enter four words separated by spaces, wherein the first word has 4 letters, the next two have three letters, and the last word has five letters
3> DON'T hit enter at the end of the line.
4> Save the file.
5> Close Notepad.
6> Reopen Notepad.
7> Open the file you just saved.

or

Open a note pad
type Bush hid the facts
save that file,
close it
again open and see...

NOTEPAD "world trade centre trick".. :Rahul

Did you know that the flight number of the plane that had hit WTC ...on
9/11 was Q33N ....Open your Notepad in ur computer and type the flight
number i.e Q33N... Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings.

log trick !! make ur Notepad a diary !!

Sometimes we want to insert current data and time, whenever we open the file in the notepad. If you are a lazy person like me, who don’t like to press F5 whenever you open a notepad. Then here is a trick to avoid this. Just add a .LOG in the first line of your text file and close it.
Whenever you open the file with that text in the first line in the notepad, it will insert the current date and time at the end of the file. You can start entering your text after that.

WHY?

The reason this happens:

In notepad, any other 4-3-3-5 letter word combo will have the same results.
It is all to do with a limitation in Windows. Text files containing Unicode UTF-16-encoded Unicode are supposed to start with a "Byte-Order Mark" (BOM), which is a two-byte flag that tells a reader how the following UTF-16 data is encoded.

1) You are saving to 8-bit Extended ASCII (Look at the Save As / Encoding format)
2) You are reading from 16-bit UNICODE (You guessed it, look at the Save As / Encoding format)
This is why the 18 8-bit characters are being displayed as 9 (obviously not supported by your codepage) 16-bit UNICODE characters

~ cheers ~

SPEED UP MENU DISPLAY.!!

When using the start menu the you will notice a delay between different tiers of the menu hierarchy. For the fastest computer experience possible I recommend changing this value to zero. This will allow the different tiers to appear instantly.

Start Regedit. If you are unfamiliar with regedit please refer to our FAQ on how to get started.

Navigate to HKEY_CURRENT_USER\Control Panel\Desktop
Select MenuShowDelay from the list on the right.

Right on it and select Modify.
Change the value to 0.
Reboot your computer.

CLICKING .AVI FILES ON EXPLORER CAUSING 100% CPU USAGE.!!*

Well windows seem to have a REALLY big problem when it comes to reading AVI files. It seems that when you click on an AVI file in explorer, it'll try to read the entire AVI file to determine the width,height, etc. of the AVI file (this is displayed in the Properties window). Now the problem with Windows is that if you have a broken/not fully downloaded AVI file that doesnt contain this info, Windows will scan the entire AVI file trying to figure out all these properties which in the process will probably cause 100% CPU usage and heavy memory usage. To solve this problem all you have to do is the following:
1. Open up regedit
2. Goto HKEY_CLASSES_ROOT\SystemFileAssociations\.avi\shellex\PropertyHandler
3. Delete the "Default" value which should be "{87D62D94-71B3-4b9a-9489-5FE6850DC73E}"
Voila! Please not that this will no longer provide you with the windows properties displaying the AVI file information such as width, height, bitrate etc. But its a small price to pay for saving you resources.
NOTE: Please use caution when using regedit. Improper usage may cause windows to behave imcorrectly. Also, I cannot be held resposible. Backup your registry first.

CD ROM STOPS AUTOPLAYING/AUTORUN.!!

And the AutoPlay Tab has disappeared in My Computer, Devices With Removable Storage, Right Click on CDROM, Properties.
Solution: The service: "Shell Hardware Detection" has been set to Manual or Disabled. Go to Control Panel, Administrative Tools, Services. Return this service to "Automatic".

How to make your Desktop Icons Transparent

Go to Control Panel > System, > Advanced > Performance area > Settings button Visual Effects tab "Use drop shadows for icon labels on the Desktop"

DISPLAY MESSAGE ON STARTUP.

Start regedit, if you are unfamiliar with regedit please see our FAQ.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Modify the key legalnoticecaption with what you want to name the window.
Modify the key legalnoticetext with what you want the window to say. Restart

AUTO DELETE TEMPORARY FOLDER.!!

ll what i prefer is %temp% " without quotes.. at Start -> Run..
this opens ur temp folder n den u cal erase it neatly// still try dis one too..

First go into gpedit.msc
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder
Then right click "Do Not Delete Temp Folder Upon Exit"
Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.

make ur pdf files to speak

make ur pdf files to speak
here r the shortcuts for hearing pdf files in abobe reader 6.0 or higher

ctrl+shift+b ---->to hear the whole topic
ctrl+shift+v ---->to hear the page

2009-07-06T09:44:00.001-07:00

Crack CD Protection

Lemme share how to finish the RiPPing by cracking
the protection. This will help you w/ the most basic system of protection,
called C- dilla, that is the most usual one…

The programs we will use are 2: first, and decompiler – the files we will
work with are in ExE format, and we need a program that will HeX them (transfer
to 16 base, hexa, form) and locate the orders given in the code, then we will
find the line we need and change it to remove the protection with... – the
second program: we need a program that will *edit* the files, and fetch the
right line number we got using the first program… all those action are easly
done w/ the programs: Win32Dasm (the disassembler - decompiler program, added in
the dir [root/Win32Dasm]), and Hiew (the editing program added in the dir
[root/Hiew]). The programs are added to the tutorial, because I’m not so sure
you can find then on a stable location on the net, in the dir [root/programs].
Chapter II: The easy protection.

Okay! To save you from reading this entire tutorial for nothing you’re not going
to use I made this chapter, because there is a good chance you won’t be needing
it! Some games comes w/ protection as a files in the [/Setup] dir (or root
dir) called: [00000001.TMP], [CLCD16.DLL], [CLCD32.DLL] and most important
[CLOKSPL.EXE]... if you see any of them delete it and the protection should
disappear (Important! delete them after making a mirror of the game on your HD,
using the info in the next chapter) … if you are still getting an error message
just keep on reading.

Chapter III: Finding the right file – and the right error.
The files we are going to work w/ will be the main ExE of the game: you will
find it on the CD, in a dir called [/Setup] or [/data], but the easy way to find
it is just installing the game, and the ExE that starts the game – will be the
ExE we need! ... once you’ve got it make some room on your HD, because we are
going to copy the hole CD to it… before you do that: some games have am option,
when Installing, to Install the full game to the CD (but still needing it to
play), use it if possible, The files you need to copy are all the game files,
in some games it is the root dir of the CD, in others it is the [root/data] dir…
the worst case is when the game is inside a CAB file, then you have to use a CAB
extractor (WinZip 8 should do the job), and if it is protected a different
program that can compile CAB format (I’ll try to put it on the tutorial as
well). Once you’ve done all that – press the ExE, and if the game opens close it
and exit the CD, then press again- you will get an error window! … usually the
line goes like: “Error, please enter CD to run game” or “CD error” or “Error
reading CD-ROM” .. what ever error you get – write it down and remember it, we
are about to look for it in the ExE code, and change it!
Chapter IV: Finding the right line number.

Open the first program - Win32Dasm, by unzipping it and clicking on
[/w32dsm89.exe], now we have to load the file we know is the main ExE of the
game, so click on “Disassembler“ in the main menu, then “Open File to
Disassemble...” (Important! Make sure you got 50-100MB free on your HD) before
then pick the file from the clone game dir you made in your HD (Important! make
a backup of the ExE) … after you’ve success fully w8ed while the program
disassembled the file, you will see *a lot * of gibberish… don’t worry! You
don’t have to understand what is says (I don’t, and I’m not so sure ne1 does…
except the programs of course) … (Important! If you can’t read and the font
shows only numbers and bizarre letters, click on “Disassembler” in main menu,
then “Font…” then “select Font” then pick Arial or something in English) … now
you have to find the exact line number out of the 2 million in the file that has
the error message in it, do that by clicking the “String Data references”
button, from the buttons menu (under the main menu) – the second one from the
right (-your right)… now you get a list of all the lines in the ExE that refers
to actions, and you have narrowed the lines from 2 million – to 2 thousand… to
find the error message click the first letter it started w/ (for example, if the
message was “Error reading CD-ROM” click E) then search ‘till you find the
error line you are looking for! … once you’ve found it… it will mark the title,
pick the first line, and it should change color to green (that means the line
can be edited and is important)… to be sure you have taken the right line:

if
there is a line like:
“:0044XBCK EB08 ….. (lots of spaces) …. Jmp 0044EBD8” or:
“:0044XBCK EB08 ….. (lots of spaces) …. Call 0044EBD8” or:
“:0044XBCK EB08 ….. (lots of spaces) …. Push 0044EBD8”

you at the right line, it says the command is a function, effected by the user,
and probably the protection we are looking for (notice the words: Jmp = Jamp,
Call = Call, Push = Push)… now that we got the right line we have to find her
number! That is done by looking at the bottom of the program window and in the
line, that should look similar to this one:

“Line:*** Pg *** of *** Code Data @:0045821 @Offset 00045821h in file:***.exe“
notic the number that comes after the word „Offet“ in this line: 00045821h that
is the line number! But notice the letter „h“ at the end of it – you don’t need
it, and don’t forget to remove it from the number, now – the only thing left to
do is changing the line and removing the protection!
Chapter V: Editing the line.

After writing down the line number you can minimize Win32Dasm, because for now
we have finished using it. Open the second program: Hiew (added in the
tutorial), this is an editor that will work bad for searching the right line,
but will do if you know the line number and just wanna change it…
Open again the same game ExE you have processed in Win32Dasm. When you enter you
see a lot of gibberish, that’s the code, and you need to change it to the
decoded language… do that by pressing the F4 key and then pick the option
“Decode“ .. heh! Alot better now... now click F5 key, to search the right line,
you will see the line numbers at the left end of the screen is gray, enter the
line number you got from Win32Dasm and it will jump you to the right loction in
the file... now, this is the difficult part, not hard to do – but hard to
explain, near the line number (just at the right) you will see the command in
HeX form, it should be something like BC1BB3D2D1 that is in HeX code (base 16)
which means a number (=byte) is represented by 2 letters/number, so that the
group (BC1BB3D2D1) is made of 5 bytes: BC – 1B – B3 – D2 – D1 ... (10 numbers =
5 bytes, 8 numbers = 4 bytes and so on...), we are about to change evrey byte
from D1 or BC to 90 this is done by pressing the key F3 (activates Editing
option) and pressing, for every byte, the number 90 (90 is the noop number, that
will disable the action)... and in our case, the command will change from
BC1BB3D2D1 to 9090909090 ... once it is done click the key F10 to save the
offset, and exit.

Chapter VI: Testing.
Now that you have an ExE w/out the error line, activate it from the same clone
dir of the game you made to test it, if its working – congratulation! You have
just cracked a CD protection! … if you are getting another error message redo
the same steps you have do w/ the first error message (in chapters 3-5) to
change it as well (Important! Do it on the same ExE you have edited, and backup
this one as well) and then test it again. You might be needed to do it several
number of times, until you are getting no error message and the game runs!

Chapter VII: Quick order list.
- Start without Cd then look at the error message and write it down.
- Search the msg in Win32Dasm referance and copy nmber w/out the H at the end!.
- Open Hiew, F4 to Decode, F5 to seach the line, and change the command – 90 for
every 1 byte.
- F10 to save and then get out, don’t forget to test!

2009-07-06T09:40:00.000-07:00

shtcut to restarting xp..

You can restart a Windows XP Pro and Home machine easily by creating a shortcut with following path. (Assume you installed Windows XP on your C: Partition) "c:\windows\system32\shutdown.exe -r -f -t 00" -r is for restarting the computer. -f is to force close all programs without saving. -t 00 is used to restart in zero seconds. i.e. as soon as you D.Click on the shortcut. You can log off from a Windows XP Professional or Home edition by running "C:\windows\system32\shutdown.exe -l -f -t 00". Also you can shutdown a Windows XP Home or Professional edition by running "c:\windows\system32\shutdown.exe -s -f -t 00". You always have to turn from the CPU after running this command. (Same with AT and ATX powered machines.) If you want to turn down power of ATX machine automatically, run "c:\windows\system32\tsshutdn.exe 00 /POWERDOWN /DELAY:00" This is used to turn off a server. Even though your computer will be
shutdown completely, this whole operation will take 30 seconds to finish. Even though you don't have networked computers attached to your computer, this works.

1) Disabling Display of Drives in My Computer :

This is yet another trick you can play on your geek friend. To disable the display of local or networked drives when you click My Computer go to : HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer Now in the right pane create a new DWORD item and name it NoDrives. Now modify it's value and set it to 3FFFFFF (Hexadecimal) Now press F5 to refresh. When you click on My Computer, no drives will be shown. To enable display of drives in My Computer, simply delete this DWORD item. It's .reg file is as follows: REGEDIT4 [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explore r] "NoDrives"=dword:03ffffff

2) Pop a banner each time Windows Boots :

To pop a banner which can contain any message you want to display just before a user is going to log on, go to the key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WinLogon Now create a new string Value in the right pane named LegalNoticeCaption and enter the value that you want to see in the Menu Bar. Now create yet another new string value and name it: LegalNoticeText. Modify it and insert the message you want to display each time Windows boots. This can be effectively used to display the company's private policy each time the user logs on to his NT box. It's .reg file would be: REGEDIT4 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Winlogon] "LegalNoticeCaption"="Caption here."

3) Great trick Lock ur PC yourself

lock ur pc.. open notepad copy and paste the script below and save it .VBS extention
This wil create a shortcut.. run(click) it

set WshShell = WScript.CreateObject("WScript.Shell")
set oShellLink = WshShell.CreateShortcut(wshShell.SpecialFolders("Desktop") & "\LockWorkstation.lnk")
oShellLink.TargetPath = "%windir%\system32\rundll32.exe"
oShellLink.Arguments = "user32.dll,LockWorkStation"
oShellLink.Save

first select a folder for example i'll use a folder name movies in D drive D:\movies\

in the same drive u create a text file and type

ren movies movies.{21EC2020-3AEA-1069-A2DD-08002B30309D}

and save it as loc.bat

again u type in a notepad as

ren movies.{21EC2020-3AEA-1069-A2DD-08002B30309D} movies

and save it as key.bat

now in D drive u can see two batch files loc and key.. when u double click loc the movie folder will change to control panel and whn u double click key the control panel will change to normal folder..

there are two more different tricks in dis site to lock ur pc down in a unique ways.. donno where i have typed it.. !!!

4) Deleting System Options from the Start menu :

You can actually remove the Find and Run options from the start menu by performing a simple registry hack. Again like always Launch the registry editor and scroll down to the below key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer Right-click on the right pane and select New, DWORD Value. Name it NoFind.(To remove the RUN option name it NoRun). Double-click the newly create DWORD to edit it's value and enter 1 as its value. This will disable the FIND option of the Start Menu and will also disable the default Shortcut key(F3 for Find.) To restore the Run or find command modify the value of the DWORD to 0 or simply Delete the DWORD value.

5) Cleaning Recent Docs Menu and the RUN MRU :

The Recent Docs menu can be easily disabled by editing the Registry. To do this go to the following Key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer Now in the right pane, create a new DWORD value by the name: NoRecentDocsMenu and set it's value to 1. Restart Explorer to save the changes. You can also clear the RUN MRU history. All the listings are stored in the key: HKEY_USERS\.Default\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMR U You can delete individual listings or the entire listing. To delete History of Find listings go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Doc Find Spec MRU and delete

6) Can u Delete Recycle Bin?

1 thing is 4 sure, delete option can be added 2 recycle bin...
the old registry thing will work out.....
* launch d registry...
* open HKEY_CLASSES_ROOT\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\ShellFolder
* to add a rename and delete option, change the Dword attribute to 70 01 00 20
* refresh and reboot the system..... u r done.

PS: always backup ur data as well as registry b4 attempting 2 work on it if u r a newbie....

7) To change the icons used for specific drives in explorer

Open regedit by typing regedit into start->run

then navigate to

HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/Explorer

now create a key(KEY not VALUE!!) called DriveIcons under Explorer...
now within DriveIcons, create another key with the drive letter you want to change (e.g.,HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\DriveIcons\K)...
create another key within the drive letter key called DefaultIcon...
now set the default String value equal to the icon you want to use. if you have a file that has more than one icon in it, such as a DLL file, use the standard
C:\full_path\icon_file.dll,n <file:///C:/full_path/icon_file.dll,n>) where n is the number of the icon within the file icon_file.dll...

~ c h e e r s! ~

More

change drive icons.....

first of all copy a icon file to the root of the drive.
example: c:\icon.ico

then create a file called: autorun.inf in c:\autorun.inf
then open that file and type the following:

[autorun]
icon=icon.ico

save and close the file.

now open my computer and resfresh.. and woh! icon changed....
you can apply to other drives too.

be carefull:

"autorun.inf" and "ico.ico" must be in the root of the drive.
example: c:\autorun.inf and c:\icon.ico.
same on the root.

ENJOY, this works on 98 too!!!!!!!!!!!!!!!!!!

8) Hacking windows SEND TO MENU

I know this is a very simple thing but the problem, as like many other issues, is the ignorance about it.

How often do you copy songs from a CD? Or some photos from a CD?

What do you do? You select the required files and do a CTRL –C. Open the destination folder and do a CTRL-V. Here is something you can benefit time from. Customize your SEND TO MENU.

This sounds simple and you can do it in less than sixty seconds.
You can create your own BASKET.

First you’ll need access to hidden files. So change your view settings to make all hidden files visible.
Tools -> folder options -> view (tab) and select the show hidden files and folders.
go to parent drive:/documents and settings/(user name)/send to

Open up my computer and locate your most used folders.

Create a shortcut of the most used folders in SEND TO FOLDER.You can do this in a number of ways.

Right click -> send to desktop(create shortcut) and move the shortcut from the desktop to the SEND TO FOLDER

Copy the most used folder and go to SEND TO FOLDER and right click -> paste shortcut.

Also remember to rename the shortcuts to send to videos or send to potos. We don’t need confusion when we use the same later.

5. DONE

~ c h e e r s! ~

9) How to remove the shortcut arrow from the desktop ?

Open Regedit and navigate to the following key:

HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Shell Icons
Backup the key. More information.
In the right-pane, create a new String value named "29"
Double-click 29 and set its data to:

C:\Windows\System32\shell32.dll,50 (an empty icon)
Close Registry Editor.

Now,

Right-click Desktop, choose Properties
Click the Appearance Tab.

Click Advanced button.

Choose Icon from the drop-down list

Set it's size to 31 and press OK, OK.

The changes will be applied now. Repeat the above steps and then set the Icon size back to 32 (defaults). The above steps are required to force Windows to redraw the icons

10) The Complete list ! Can u Do it!

Try to create a folder in Windows with either of these names--
"con" or "nul" or "Aux" or "Lpt1".
Windows will not let u create ....

This s coz these refer 2 some well known ports....
-con corresponds to the console
-Lpt1 corresponds to printer and so on....

well dat was common but hw bt this ? Try these more

CON, PRN, AUX, CLOCK$, NUL, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, and LPT9.

TURN NUMLOCK ON AT LOGON.!!

NumLock does not toggle on by default (system-wide), even if you have it set in your PC's BIOS, because of XP's multi-user functionality. Guess Microsoft doesn't know everyone actually turns it on, which should be reason enough for what acts as "default"...
Anyway, you can hack the Windows Registry to change this behavior, or run a script at logon to turn NumLock on.
1. To enable NumLock through the Registry:
* Open Windows' Registry Editor (START > RUN, type "REGEDIT").
*. Navigate to HKEY_USERS\.Default\Control Panel\Keyboard.
*. Change the value for InitialKeyboardIndicators from 0 to 2.
2. To enable NumLock using a script, see this MS Knowledgebase article for complete instructions:
CODEhttp://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q262625
Option 1 is the quicker method, but if you have more than one user on your system and one or more don't want NumLock on (stranger things have been known of), then option 2 is the way to go since it allows you to only attach the script to specific users.

REMOVING SERVICES DEPENDENCIES.!!

This will allow you to disable a service or uninstall it from your system without effecting another service that depends on it. Here's how you do it
1. After you have set your services the way you want them and you have disabled/uninstalled something that another services depends on, run "regedit"
2. Under HKEY_LOCAL_MACHINE\System\find the service that will not function, do to another service being disabled/uninstall (found in ControlSet001\Services, ControlSet002\Services, and CurrentControlSet\Services)
3. Once you have found the service right-click on the string value, "DependOnService,"and modify
4. You should now see a list of services that it is dependent on. Simply delete the service that you have disabled/uninstalled
5. Restart your computer and your ready to go Disclaimer REMEMBER TO BACKUP YOU REGISTRY FIRST I'm not totaly sure if this will have any negative effects on your system. I used this method after uninstalling "Netbios over Tcpip" from my system completely, so that my Dhcp service would function and I have had NO negative effects on my system.

TURN ON UR PC IN JUST 10 SECONDS

Aight so u wanna know how to turn the pc on in 10 seconds (may vary)Aight heres what u have to do to turn ur pc on in 10 seconds

Aite Click on the start button then press R it will take u to Run well go to run
n type Regedit
press enter
this will open Registery Editor
now look for the key

HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex

now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer

2009-07-04T08:41:00.000-07:00

Xp Tricks Contd.. More of Dem

Make your folders invicible...:)

1)Right Click on the desktop.Make a new folder
2)Now rename the folder with a space(U have to hold ALT key and type 0160).
3)Now u have a folder with out a name.
4)Right click on the folder>properties>customize. Click on change icon.
5)Scroll a bit, u should find some empty spaces, Click on any one of them.

click ok

Easily Disable Messenger

Go into: C:/Program Files/Messenger. Rename the Messenger folder to "MessengerOFF".
Remove Messenger

· Go to Start/Run, and type: "rundll32 setupapi,InstallHinfSection BLC.Remove 128

%SystemRoot%\INF\msmsgs.inf"

Turn Off Autoplay for Program CDs

How can you stop Windows XP from launching program CDs?
· Click Start, click Run, type GPEDIT.MSC to open Group Policy in the Microsoft
Management Console.

· Double-click Computer Configuration, double-click Administrative templates,
double-click System, and then click Turn off autoplay.

· The instructions on your screen describe how to configure this setting. Click
Properties to display the setting dialog.

· Click Enabled, and choose CD-ROM drives, then click OK, to stop CD autoplay.

This setting does not prevent Autoplay for music CDs.

Change Drive Letters in Windows XP

When you add drives to your computer, such as an extra hard drive, a CD drive, or a
storage device that corresponds to a drive, Windows automatically assigns letters to the
drives. However, this assignment might not suit your system; for example, you might have
mapped a network drive to the same letter that Windows assigns to a new drive. When you
want to change drive letters, follow these steps:

· Right-click My Computer, and then click Manage.

· Under Computer Management, click Disk Management. In the right pane, you'll see
your drives listed. CD-ROM drives are listed at the bottom of the pane.

· Right-click the drive or device you want to change, and then click Change Drive
Letter and Paths.

· Click Change, click Assign the following drive letter, click the drive letter you
want to assign, and then click OK.

Do Not Highlight Newly Installed Programs

Tired of that annoying little window that pops up to tell you that new software is
installed? If it gets in the way when you're logging off, turn it off completely. To do
this:

· Click Start, right-click at the top of the Start menu where your name is displayed,
and then click Properties.

· In the Taskbar and Start Menu Properties dialog box, on the Start Menu tab, click
Customize.

· Click the Advanced tab, and then clear the Highlight newly installed programs check
box.

· Click OK, and then click OK again

Change the Default Opening Folder in Windows Explorer

By default, Windows Explorer opens showing the My Documents folder. To change the
default setting so that all top-level drives and folders are shown, follow these steps:

· Click Start > Programs > Accessories, then right-click Windows Explorer, and click
Properties.

· Under Target field, which reads %SystemRoot%\explorer.exe, add to make the line
read:

%SystemRoot%\explorer.exe /n, /e, /select, C:\

Close Multiple Windows

If you just opened a number of separate, related windows (a folder inside a folder,
and so on), there's an easier way to close them all than one-at-a-time:
· Hold down the shift-key as you click the X caption button in the upper-right corner
of the last window opened. Doing so closes that window and all windows that came before it

change fat -> ntfs

To change ur File system from command prompt
type: convert c:/fs:ntfs(ex:'c' is the drive letter)

2009-07-04T08:39:00.001-07:00

Xp problems and their solutions

There is One for Everyone !!

1) When i try to access my task manager(Ctr+Alt+Del)...it displays message
'task manger has been disabled by ur administrator'..., and also i cant access my registry too..!!
what may have caused this problem....
is it becos of some VIRUS...????
how can i repair this without re installing...?? any particular software??

1: Close the IE browser. Log out messenger / Remove Internet Cable.
2: To enable Regedit
Click Start, Run and type this command exactly as given below: (better - Copy and paste)
REG add HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System /v DisableRegistryTools /t REG_DWORD /d 0 /f
3: To enable task manager : (To kill the process we need to enable task manager)
Click Start, Run and type this command exactly as given below: (better - Copy and paste)
REG add HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System /v DisableTaskMgr /t REG_DWORD /d 0 /f
4: Now we need to change the default page of IE though regedit.
Start>Run>Regedit
From the below locations in Regedit chage your default home page to google.com or other.
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Internet Explorer\Main
HKEY_ LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main
HKEY_USERS\Default\Software\Microsoft\Internet Explorer\Main
Just replace the attacker site with google.com or set it to blank page.
5: Now we need to kill the process from back end. Press Ctrl + Alt + Del
Kill the process svhost32.exe . ( may be more than one process is running.. check properly)
6: Delete svhost32.exe , svhost.exe files from Windows/ & temp/ directories. Or just search for svhost in your comp.. delete those files.
7: Go to regedit search for svhost and delete all the results you get.
Start menu > Run > Regedit >
8: Restart the computer. That’s it now you are virus free.

it works !!

** Shared from Internet (reva)

2)I don't have IIS( Internet Information Services) windows componet on my system

As far as I know one can't have IIS running on XP Home. I think u will have to upgrade it to XP Prof.
in proff That's simple get the Win XP CD, go to control panel-->add/remove programs and then to add/remove windows components. There u will find the option for adding IIS, just check the checkbox and follow the instructions. You r done!!

3) Folder Option Vanished

IF U WANT UR FILES THT WERE HIDDEN U CAN TYPE *.* IN SEARCH AND ALSO TICK THE OPTION "INCLUDE HIDDEN FILES".
NOW SEARCH IN THE DRIVE IN WHICH U STORED UR FILES, U WILL GET UR FILES BUT TO GET BACK THE OPTION U EITHER HAVE TO REINSTALL WINDOWS OR REPAIR IT. well this is as far as i know..

Post your Comment If you Know More

4) My volume icon is not showing in taskbar, Yet It's Enable From Control Panel > Sound And devices

Assuming that you have tried the basic steps i am directly trying with the most possible solutions. This issue most commmonly occurs because the settings are not saved. Also there might be some startup program which is diabling the Systray.exe from loading up.

Try this...
1) Re-enable the volume icon by disabling and then enabling Place volume icon in the taskbar in the Sound and Audio applet.
2) Then copy the following text which is in red into a notepad file and then save it as "fix.reg". Please make sure that there is no .txt extension after that.
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoSaveSettings"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run]
"SystemTray"="SysTray.Exe"

3) Merge the file to the registry by simply double clicking on it.
4) Reboot

This should definitely work. Please reply back with the status.

Cheers

:shared frm internet (bond)

5)Whenever i try d'loading stuff from the net, the download starts and the comp just restarts. due to dis i have to install d'load managers wich i hate. help needed anyone. i have win xp!

If the computer just restarts itself, it cud possibly be an application crash..
check the Dr.watson log for details..
START-RUN- drwtsn32.
check the path for the log here... open the log and check which application is causing the crash.
turn of automatic reboot,cos you wud miss it if there is a BSOD being generated.

or may be u could try this one out

Go to Start>Run--Type 'services.msc', hit ENTER
Scroll down to a service called Remote Procedure Call, right click, go to properties, there will be a tab named Recover Action, change it to 'Take No Action' if it's not already selected. Your problem should be solved for the time being. Also look for all network related srvices DNS, TCP-IP and also Windows Firewall/ICS service if you're on LAN/WAN, see that all of these are set to Automatic or Manual. Reply to me with results

(david n kumar)

6)I accidentally deleted the Show Desktop icon which sits normally on the bottom left hand corner of the Taskbar. How do I restore the icon?

Click Start, Run and type the following command:

regsvr32 /n /i:U shell32.dll

The Show Desktop icon file should be available now.

or

Click Start, Run, and type Notepad.exe. Copy the following contents to Notepad.

[Shell]
Command=2
IconFile=explorer.exe,3
[Taskbar]
Command=ToggleDesktop

Save the file as - : Show Desktop.scf. Now, drag the file to the Quick Launch Toolbar. (Notepad might automatically append a .txt extension to the file name. Remove this extension if present.)

2009-07-04T08:35:00.000-07:00

Speed up Booting Xp by 61 Times

run -> msconfig - Hit Enter

Whenever you start your computer, you are faced with a few moments of thumb twiddling while Windows XP boots and prompts you to log on. Although you should expect to wait for a few moments, sometimes Windows XP seems to boot rather slowly. In fact, you may notice that over a period of time the PC that used to roar to life seems a bit sluggish instead. Fortunately, you can perform several techniques that help Windows XP get the bootup speed you want. This Article explores how to put these techniques to work.

Stopping Unneeded Startup Services !

Along with the core operating system and programs that Windows XP runs when it starts, there is also a host of services involved. Many of these services are necessary for Windows XP to operate correctly. However, many of them are for features in Windows XP that you may not use at all. You can peruse the services and disable any service that you do not want to run. The fewer services that run, the more quickly Windows XP will boot.

Caution:

Exercise caution when stopping services. If you do not know what a service does or are unsure of the ramifications of stopping the service, leave it alone. Some services are critical to Windows XP's operations, so make sure you understand what the service is before you disable it.

To reduce the number of services that start on bootup, you can access two different areas of Windows XP. The first is the System Configuration Utility. The Services tab shows you the services that start when the computer boots.
You can stop a service from starting by simply clearing the check box next to the service and clicking OK. However, before you do so, there is another way to disable services that you may prefer because the interface gives you more information about the service in question.

Open Control Panel/Administrative ToolsServices or else select Start/Run, type services.msc, and click OK. Either way, you see the Services console.
I prefer to use the Services console instead of the System Configuration Utility because it describes what the service does. Additionally, you can double-click a service and examine its properties.

Notice the Startup Type column in Figure 4-2. This information lists whether the service is automatic or manual. Manual services are only started in Windows XP when you start a process that requires the service. Some other process may require the service that has a "dependency" relationship with it; in this case, the dependency service will start, as well. Because these services do not start automatically when you boot Windows XP, you do not need to do anything with manual services.

However, all services listed as automatic start when Windows XP boots. These are the services that increase boot time. As I have mentioned, many of them are necessary and important, so you should not stop automatic services from booting unless you are sure of the ramifications. You can get this information by looking at the Description column. Here's a quick look at common services you may want to live without:

SPEED UP BOOT BY DISABLING UNUSED PORTS.!!

You may have tried many tweaks like modifying windowsXP start-up applications, prefetches, unload DLLs method,etc. And yes those methods do work for me.
I have just accidentally found out another way to give you an extra boost in windowsXP's boot performance. This is done by disabling your unused devices in
Device Manager. for example, if you don't have input devices that are connected to one of your USBs or COM ports, disabling them will give you an extra perfromance boost in booting. Go to Control Panel -> System -> Hardware tab -> device manager Disable devices that you don't use for your PC and then restart.

Do Dis !!

1.Start Registry Editor (Regedit.exe).

2.Locate the following key in the registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement\PrefetchParameters

3.Make sure you backup the keys by exporting them to a .reg file.

4.On the EnablePrefetcher value, change the setting from 3 to 5 (decimal).

5.Close the registry editor.

6.Restart your computer

Automatic Updates !

This service enables Windows XP to check the Web automatically for updates. If you don't want to use Automatic Updates, you can disable the service. You can always check for updates manually at the Windows Update Web site.

Computer Browser: If your computer is not on a network, you don't need this service. If you are on a network, leave it alone.

DHCP Client: If you are not on a network, you do not need this service. If you are on a small workgroup, you can still increase boot time by configuring manual IP addresses (which I explore later in this chapter).

DNS Client: If you are not on a network, you do not need this service. If you are, leave it alone.

Error Reporting and Event Log: You don't have to use these services but they can be very helpful, so I would leave them configured as automatic.

Fax: If you don't use your computer for fax services, you can disable this one.

Help and Support: If you never use the Windows XP Help and Support Center (found on the Start menu), you can disable this service.

IMAPI CD-Burning COM: This service enables you to burn CDs on your computer. If you never burn CDs, you can disable the service.

Indexing Service: Your computer keeps an index of files but if you rarely search for files, the service is just a resource hog. You can stop it and turn the service to manual.

Windows Firewall/Internet Connection Sharing: If you do not use these features, you can disable them.

Infrared Monitor: If you do not use infrared devices, you can disable this service.

Messenger: This service sends alert messages on a local area network (it is not the same as Windows Messenger). If you are not on a network, you can disable this service.

Print Spooler: If you do not do any printing from the computer, you can disable this service. If you print, make sure you leave it as automatic.

Remote Registry: This service allows remote users to modify the Registry on your computer. If you are not on a network, you can disable this service.

System Restore Service: This service allows you to use System Restore. If you have turned off System Restore anyway, you do not need to turn off the service. If you do, you turn off System Restore.

Themes: If you do not use themes, you can disable this service.

Windows Image Acquisition: If you do not use scanners or digital cameras, you can disable this service.

Wireless Zero Configuration: If do not use wireless networking devices, you can disable this service.

You may have a number of other automatic services, depending on software and other configurations on your computer. So it's a good idea to look through the services and learn more about them. If you double-click a service, a Properties dialog box appears
Notice that on the General tab, you see a Startup Type drop-down menu. If you want to change an automatic service to manual, select Manual here and click OK. As a general rule, don't disable a service unless you are sure you will never use it. However, manual configuration allows the service to be started when you find it necessary, thus speeding up your boot time.
However, before you change a service to manual, look at the Dependencies tab (see Figure 4-4). This tab shows you which other services depend upon the service you are considering changing.
Keep in mind that services are necessary for the vast functionality you get with Windows XP. Change only those services that you understand and do not use. How you use your Windows XP computer should be the best guide in terms of optional startup services.

Tip !

The Indexing service and the System Restore service take up a lot of disk space and system resources across the board. You can live without the Indexing service but I suggest that you keep using System Restore. It works great when you are in a bind and this is one case where the loss of speed may not be worth the ramifications of not using System Restore.

Speed Tips and Tricks for Windows XP Startup
Aside from startup programs, services, and the Prefetch folder, there are a number of other startup procedures and issues you can modify to help Windows XP start faster. The following sections explore those tips and tricks.

Manual IP Addressing on Small Office/Home Networks
Windows XP is configured to help you take care of networking. It uses the TCP/IP protocol for networking in workgroups, or what you might call small office or home networks that do not use a dedicated server.

The problem is that automatic IP addressing can be slow. When your computer boots, it has to query the network to see what IP addresses are already in use and then assign itself one. If you want to speed up the boot time a bit, consider manually assigning IP addresses to all computers on the network. This way, the network computers do not have to worry about locating an automatic IP address. Because one is manually configured, the operating system doesn't have to spend time solving this problem.

This isn't a networking book, however, so I won't delve into the implications of using a manual IP address, but if you are using a computer that functions as a host computer to the Internet (using Internet Connection Sharing [ICS]), you can get into connectivity problems if you change the configuration of the IP address. However, you can still work around this problem by starting with the ICS host computer.

Select Start/Connect To/Show All Connections. Right-click your network adapter card and click Properties. On the General tab, select TCP/IP in the list of services and click the Properties button.

In the TCP/IP properties, you can see if you use an automatic or manual IP address. In the example in Figure 4-5, I have configured a manual IP address of 90.0.0.1 and a default subnet mask. The other computers on my office network each use a different IP address in the same class, such as 90.0.0.2, 90.0.0.3, 90.0.0.4, and so on. This way, each computer has a permanent IP address, which helps increase boot time. Note that if you change the IP addresses of your computers, they must all use the same subnet mask. A default subject mask of 255.255.255.0 will keep you in good shape.

Make sure you understand the implications of changing IP addresses on your network. If you have no networking experience at all, you may be wiser to leave the automatic IP addressing as is and try to gain some speed using the additional suggestions in this chapter.

Disabling Recent Documents History !

Windows XP includes a feature that keeps track of all recent documents you have opened or used. The idea is that you can select Start/Recent Documents History and quickly reopen any document you have recently used. I use many documents each day and never use the feature myself. In my opinion, I can keep up with what I want to use without Windows XP doing it for me.
The bad thing about Recent Documents History is that Windows XP has to calculate what should be put there each time you boot Windows, which can slow things down. So, if you never use the Recent Documents History, it's a good idea to disable it. Here's how:
1. Open the Registry Editor (select Start/Run, type regedit, and click OK).
2. Navigate to HKEY_CURRENT_USER\Software\Mcft\Windows\ CurrentVersion\Policies\Explorer.
3. Create a NoRecentDocsHistory D_WORD key. Double-click the value to open it once it is created.
4. Set the Data Value to 1 to enable the restriction.
5. Click OK and close the Registry Editor. You'll need to restart the computer for the change to take effect.

Disabling the Boot Logo !

You can remove the boot logo that appears when you start Windows XP. This little tweak probably shaves only a few seconds off your boot time but seconds count if you are serious about trying to get Windows XP up and running as quickly as possible. The only negative is that if you remove the boot logo, you will also not see any boot messages, such as check disk. (But if you are not having problems with your computer, this isn't such a big deal.)
To remove the boot logo, follow these steps:
1. Select Start/Run, type msconfig, and click OK.
2. In the System Configuration Utility, click the BOOT.INI tab.
3. On the BOOT.INI tab, click the NOGUIBOOT check box option. Click OK.

Removing Unwanted Fonts !

One trick that increases your boot time a bit is to lose any fonts in the Fonts folder in Control Panel that you never use. The more fonts you have, the more processing Windows XP has to do to prep all of those fonts for use. You must be a bit careful here to not remove fonts that you might want, but there is a good chance that you can live without many of them. For instance, you may have foreign language fonts and other symbol fonts (such as Wingdings) that you never use.
To delete unneeded fonts, follow these steps:
1. Open the Fonts folder in Control Panel.
2. Select Edit/Select All and then Edit/Copy.
3. Create a new folder on your desktop, open it, and select Edit/Paste.
4. In this new folder, delete any of the fonts you do not want.
5. Return to the Fonts folder in Control Panel. Right-click the selected fonts and click Delete.
6. Go back to your new desktop folder and click Edit/Select All.
7. Return to your Fonts folder and click Edit/Paste. You now have only the desired fonts in the Fonts folder.

Tip:

You can directly delete fonts from the Fonts folder without creating the secondary folder. However, I recommend the preceding steps to help ensure that you do not make a mistake in the deletion process.

Stopping Remote Assistance and Remote Desktop Sharing !

In Windows XP Professional, you have two remote networking features called Remote Assistance and Remote Desktop Sharing. These remote networking features are very helpful in a variety of situations but if you don't use them, it is good idea to disable them to save boot time. You can always enable them later if you want to use them.
Note:
If you are interested in using Remote Desktop or Remote Assistance, see my book Windows XP for Power Users: Power Pack published by John Wiley & Sons.
1. Open the Start menu, right-click My Computer, and choose Properties.
2. Click the Remote Tab.
3. Clear both check boxes to disable Remote Assistance and Remote Desktop.

Speeding Up the Dual-Boot Timeout !

If you dual-boot your computer with Windows XP and another operating system, you see an operating system selection menu on startup. If you typically boot into Windows XP and not the other operating system, you can speed up the dual-boot timeout value so that you do not wait so long for the boot process to select your default operating system and continue with the boot process. The default timeout value is 30 seconds but you can change this setting to 10. This gives you enough time to select the alternate operating system if you want but also speeds up the boot process. You can skip this section if you do not use a dual-boot configuration.
Follow these steps:
1. Locate the boot.ini file on your computer. It is a hidden file by default; mine is located in C:\boot.ini.
2. Open the file with Notepad (which is what opens it by default).
3. Change the Timeout value to 10 (see Figure 4-11).
4. Select File/Save and close Notepad.

Speeding Up Your PPPoE Connection !

If you use a Point-to-Point Protocol connection over Ethernet (PPPoE), you may notice a delay in using the PPPoE connection after startup. By default, there is a 120 second delay but you can stop this behavior by manually configuring an IP address for the network adapter card. If you do not use a PPPoE connection, you can skip this section.
1. Select Start/Connect to/Show All Connections.
2. Open the TCP/IP properties for your LAN network interface card.
3. Manually set the IP address on the TCP/IP properties to an appropriate IP address and subnet mask for your network.

Reducing the Wait Time

When you start to shut down Windows XP, it has to quit, or "kill," any live applications or processes that are currently running. So close all applications first. However, some applications and processes are always running in the background. You can reduce the amount of time that Windows XP waits for those applications and processes to close before Windows XP kills them. Edit three different Registry settings to change this:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop. Select WaitToKillAppTimeout and set the value to 1000.
3. Select the HungAppTimeout value and set it to 1000 as well.
4. Navigate to HKEY_USERS\.DEFAULT\Control Panel\Desktop. Set the WaitToKillAppTimeout and set the value to 1000. Select the HungAppTimeout \newline value and set it to 1000 as well.
5. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control. Select the WaitToKillServiceTimeout value and set it to 1000.
6. Close the Registry Editor.

Automatically Killing Tasks on Shutdown !

You know the drill. You start to shut down the computer, you wait a few moments, and then you see a dialog box asking if you want to kill an application or service that is running. Instead of prompting you, you can make Windows XP take care of the kill task automatically. Here's how:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop.
3. Highlight the value AutoEndTasks and change the value to 1.
4. Close the Registry Editor.

Here's a great tip to speed up your browsing of Windows XP machines. Its actually a fix to a bug installed as default in Windows 2000 that scans shared files for Scheduled Tasks. And it turns out that you can experience a delay as long as 30 seconds when you try to view shared files across a network because Windows 2000 is using the extra time to search the remote computer for any Scheduled Tasks. Note that though the fix is originally intended for only those affected, Windows 2000 users will experience that the actual browsing speed of both the Internet & Windows Explorers improve significantly after applying it since it doesn't search for Scheduled Tasks anymore. Here's how :

Open up the Registry and go to : HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace Under that branch, select the key : {D6277990-4C6A-11CF-8D87-00AA0060F5BF} and delete it. This is key that instructs Windows to search for Scheduled Tasks. If you like you may want to export the exact branch so that you can restore the key if necessary. This fix is so effective that it doesn't require a reboot and you can almost immediately determine yourself how much it speeds up your browsing processes.

2009-07-04T08:32:00.001-07:00

How to Clone a Hard Drive

Did know that you could clone your current Hard Drive without having to by extra software? Maybe you didn't know that all that you needed, was already set up on your current system? Well, it is... and if you follow this tut, you shouldn't have much of a problem.

Make sure that you have a Master and a Slave setup on your system. The Slave drive, in this case, is where all the data on the Master is going to go to.

First: Perform a Scandisk your Master drive and follow that with a thorough Defrag. If you have an Antivirus program, do a thorough sweep with the AV first, then do the Scandisk, followed by the Defrag.

Second: Do the same thing to the target drive, as you did the Master: Scandisk then a thorough Defrag.

Third: Right-click on the Target drive and click on Format. When the box comes up, click your mouse onto the "Full" button.

Fourth: After Formatting the Target drive, run a Scandisk again and click on the button that says "Autofix Errors".

Fifth: In this final part, you might want to cut-and-paste to code in, unless you are sure that you can do it without making any mistakes:

Click on the "Start" button, then click on the "Run..." button, then place the following into the Runbox:

"XCOPY C:\*.*D:\ /c/h/e/k/r" (minus the quotes, of course) then press the "Enter" button.

If you receive an error message, then remove the space from between XCOPY and C:\

Anything that should happen to come up in the DOS box, just click "Y" for "Yes". When its all finished, pull the original Master from the system, designate the Slave as the Master (change your jumpers), then check your new Master out.

This tut has worked and has been tested on all systems except for Windows 2000, so you really shouldn't have any problems. If, by any chance, you should come across a snag, message me and I'll walk you through it.

~cheers~

2009-07-04T08:30:00.000-07:00

20 things you didn't know about Windows XP

You've read the reviews and digested the key feature enhancements and operational changes. Now it's time to delve a bit deeper and uncover some of Windows XP's secrets.

1. It boasts how long it can stay up. Whereas previous versions of Windows were coy about how long they went between boots, XP is positively proud of its stamina. Go to the Command Prompt in the Accessories menu from the All Programs start button option, and then type 'systeminfo'. The computer will produce a lot of useful info, including the uptime. If you want to keep these, type 'systeminfo > info.txt'. This creates a file called info.txt you can look at later with Notepad. (Professional Edition only).

2. You can delete files immediately, without having them move to the Recycle Bin first. Go to the Start menu, select Run... and type 'gpedit.msc'; then select User Configuration, Administrative Templates, Windows Components, Windows Explorer and find the Do not move deleted files to the Recycle Bin setting. Set it. Poking around in gpedit will reveal a great many interface and system options, but take care -- some may stop your computer behaving as you wish. (Professional Edition only).

3. You can lock your XP workstation with two clicks of the mouse. Create a new shortcut on your desktop using a right mouse click, and enter 'rundll32.exe user32.dll,LockWorkStation' in the location field. Give the shortcut a name you like. That's it -- just double click on it and your computer will be locked. And if that's not easy enough, Windows key + L will do the same.

4. XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.

5. For those skilled in the art of DOS batch files, XP has a number of interesting new commands. These include 'eventcreate' and 'eventtriggers' for creating and watching system events, 'typeperf' for monitoring performance of various subsystems, and 'schtasks' for handling scheduled tasks. As usual, typing the command name followed by /? will give a list of options -- they're all far too baroque to go into here.

6. XP has IP version 6 support -- the next generation of IP. Unfortunately this is more than your ISP has, so you can only experiment with this on your LAN. Type 'ipv6 install' into Run... (it's OK, it won't ruin your existing network setup) and then 'ipv6 /?' at the command line to find out more. If you don't know what IPv6 is, don't worry and don't bother.

7. You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system.

8. XP will treat Zip files like folders, which is nice if you've got a fast machine. On slower machines, you can make XP leave zip files well alone by typing 'regsvr32 /u zipfldr.dll' at the command line. If you change your mind later, you can put things back as they were by typing 'regsvr32 zipfldr.dll'.

9. XP has ClearType -- Microsoft's anti-aliasing font display technology -- but doesn't have it enabled by default. It's well worth trying, especially if you were there for DOS and all those years of staring at a screen have given you the eyes of an astigmatic bat. To enable ClearType, right click on the desktop, select Properties, Appearance, Effects, select ClearType from the second drop-down menu and enable the selection. Expect best results on laptop displays. If you want to use ClearType on the Welcome login screen as well, set the registry entry HKEY_USERS/.DEFAULT/Control Panel/Desktop/FontSmoothingType to 2.

10. You can use Remote Assistance to help a friend who's using network address translation (NAT) on a home network, but not automatically. Get your pal to email you a Remote Assistance invitation and edit the file. Under the RCTICKET attribute will be a NAT IP address, like 192.168.1.10. Replace this with your chum's real IP address -- they can find this out by going to www.whatismyip.com -- and get them to make sure that they've got port 3389 open on their firewall and forwarded to the errant computer.

11. You can run a program as a different user without logging out and back in again. Right click the icon, select Run As... and enter the user name and password you want to use. This only applies for that run. The trick is particularly useful if you need to have administrative permissions to install a program, which many require. Note that you can have some fun by running programs multiple times on the same system as different users, but this can have unforeseen effects.

12. Windows XP can be very insistent about you checking for auto updates, registering a Passport, using Windows Messenger and so on. After a while, the nagging goes away, but if you feel you might slip the bonds of sanity before that point, run Regedit, go to HKEY_CURRENT_USER/Software/Microsoft/Windows/Current Version/Explorer/Advanced and create a DWORD value called EnableBalloonTips with a value of 0.

13. You can start up without needing to enter a user name or password. Select Run... from the start menu and type 'control userpasswords2', which will open the user accounts application. On the Users tab, clear the box for Users Must Enter A User Name And Password To Use This Computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use.

14. Internet Explorer 6 will automatically delete temporary files, but only if you tell it to. Start the browser, select Tools / Internet Options... and Advanced, go down to the Security area and check the box to Empty Temporary Internet Files folder when browser is closed.

15. XP comes with a free Network Activity Light, just in case you can't see the LEDs twinkle on your network card. Right click on My Network Places on the desktop, then select Properties. Right click on the description for your LAN or dial-up connection, select Properties, then check the Show icon in notification area when connected box. You'll now see a tiny network icon on the right of your task bar that glimmers nicely during network traffic.

16. The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry entry HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 0.

17. You can rename loads of files at once in Windows Explorer. Highlight a set of files in a window, then right click on one and rename it. All the other files will be renamed to that name, with individual numbers in brackets to distinguish them. Also, in a folder you can arrange icons in alphabetised groups by View, Arrange Icon By... Show In Groups.

18. Windows Media Player will display the cover art for albums as it plays the tracks -- if it found the picture on the Internet when you copied the tracks from the CD. If it didn't, or if you have lots of pre-WMP music files, you can put your own copy of the cover art in the same directory as the tracks. Just call it folder.jpg and Windows Media Player will pick it up and display it.

19. Windows key + Break brings up the System Properties dialogue box; Windows key + D brings up the desktop; Windows key + Tab moves through the taskbar buttons.

20. The next release of Windows XP, codenamed Longhorn, is due out late dis month The next big release is codenamed Blackcomb and will be out in 2010/2011

2009-07-04T08:23:00.002-07:00

Remove Brontok Virus Urself

its the most sticky virus ..

u can Remove it

be an ethical Hacker

It works~~!!

Start ur computer in safe mode with command prompt and type the followinf command to enable registry editor:-

reg delete HKCU\software\microsoft\windows\currentversion\policies\system /v "DisableRegistryTools"
and run HKLM\software\microsoft\windows\currentversion\policies\system /v "DisableRegistryTools"

after this ur registry editor is enable
type explorer
go to run and type regedit
then follow the following path :-
HKLM\Software\Microsoft\Windows\Currentversion\Run

on the right side delete the entries which contain 'Brontok' and 'Tok-' words.

after that restart ur system
open registry editor and follow the path to enable folder option in tools menu

HKCU\Software\Microsoft\Windows\Currentversion\Policies\Explorer\ 'NoFolderOption'
delete this entry and restart ur computer

and search *.exe files in all drives (search in hidden files also)
remove all files which are display likes as folder icon.

ur computer is completely free from virus brontok

2009-07-04T08:23:00.001-07:00

Xp Registry tricks

Its a mixed bag.. a compilation of all the tricks..
many tricks are what i discovered..
many are shared ..
keep posting if u know more

Display Your Quick Launch ToolbarTip:

Is your Quick Launch toolbar missing from the taskbar?
To display your familiar Quick Launch toolbar:
Right-click an empty area on the taskbar, click Toolbars, and then click Quick Launch.

Easy as that your Quick Launch bar appears. To add items to your Quick Launch toolbar, click the icon for the program you want to add, and drag it to the Quick Launch portion of the taskbar.

--------------------------------------------------------------------------------

How to remove recycle bin from your desktop Tip:

Open Regedit by going to START - RUN and type Regedit and hit enter. Then you should navigate to following entry in registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\
Desktop\NameSpace\{645FF040-5081-101B-9F08-00AA002F954E} and delete it. This action should remove recycle bin from your desktop.

--------------------------------------------------------------------------------

How to stop new programs installed balloon from coming up tip:

Right click on START button and select properties. Click on Customize and go to Advanced tab and deselect check box saying "Highlight newly installed programs". This would help you stop this annoying feature from popping up every now and then.

--------------------------------------------------------------------------------
Unlock Toolbars to Customize Them Tip:

The new Windows XP now features locking toolbars, and you can adjust them. You may customize a lot of the Windows XP features such as the Taskbar, Start Menu, and even toolbar icons in Internet Explorer and Outlook Express. Remember your right-click:
* Right-click on a toolbar, and then click Lock the Toolbars to remove the check mark.
* Right-click on the toolbar again, and then click Customize.

You may add or remove toolbar buttons, change text options and icon options. When you've got the toolbar customized, click Close. Now right-click on the toolbar and then click Lock the Toolbars to lock them in place. com

--------------------------------------------------------------------------------

Want to remove shared documents folder from My Computer window tip:

Some don't like my shared documents folder option. If you are one of that, here is a trick to remove it.Open registry editor by going to START-RUN and entering regedit.
Once in registry, navigate to key HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders You must see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. If you delete this key, you have effectively removed the my shared documents folder.

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

How to improve on shutdown time ? Close apps automatically & quickly at shutdown tip:

Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_CURRENT_USER\CONTROL PANEL\DESKTOP and look for AutoEndTasks. On my computer default value is 0. Change it to 1. Thats all. Further more you can reduce the time it takes for Windows to issue kill directive to all active/hung applications.
In doing this only constraint that you should make sure exists is that HungAppTimeout is greater than WaitToKillAppTimeout. Change the values of WaitToKillAppTimeout to say 3500 (since default value for HungAppTimeout 5000 and for WaitToKillAppTimeout is 20000)

--------------------------------------------------------------------------------
Are you missing icons Tip:

Are you missing icons? You may be wondering where all the icons from your desktop are in Windows XP? Well if you're like me, you like to have at least My Computer, My Network Places, and My Documents on the your desktop.
You need to:
* Right-click on the desktop, and then click Properties.
* Click the Desktop tab and then click on Customize Desktop.
* Put a check mark in the box next to My Document, My Computer, My Network Places, or Internet Explorer, to add those familiar icons to your desktop. Easy yes!

--------------------------------------------------------------------------------

How to login as administrator if you don't see it available tip:

Unless and until you have run into issues and fixing XP (underwhich case you have to go to Safe Mode to login as Administrator), you can get to administrator screen by simply pressing CTRL+ALT+DELETE twice at the main screen.

--------------------------------------------------------------------------------

Speedup boot up sequence by defragmenting all key boot files tip:

Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction. In right hand panel look for Enable. Right click on it and set it 'Y' for enable. This is the way I have it set on my computer. This will help speedup boot time.

Use a Shortcut to Local Area Network Connection Information:

--------------------------------------------------------------------------------

Use a Shortcut to Local Area Network Connection Information Tip:

Here's something new in Windows XP, instead of using the command line program and typing ipconfig to get local area network information, you can try using the following shortcut:
* Click on Start, point to Connect to, and then click Show All Connections.
* Right–click the connection you want information about, and then click Status.
* In the connection Properties dialog box, click the Support tab.
* For more information, click on the Advanced tab.

To automatically enable the status monitor each time the connection is active, in the connection Properties dialog box, select the Show icon in taskbar notification area when connected check box.

--------------------------------------------------------------------------------

Do you know you can have Virtual Desktops (like in Linux) with PowerToys ?

If you have powertoys installed on Windows XP Its available for free at Microsoft download webpage. It is very easy to enable Microsoft Virtual Desktop Feature. Simply right click on the Start Panel Bar also called TaskBar, Click on Tool Bar and select Desktop manager.
You would see a set of 5 icons placed on the right portion of the TAskBar. Click on number 1 to 4 to go to any of the desktops. Now you have have four different Active Desktops.
IMPORTANT NOTE: You may see a little degradation in performance.

--------------------------------------------------------------------------------

Customize Internet. Explorer Title bar tip:

This tip won't make your computer any faster but may help personalize your computer experience. Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_CURRENT_USER\Software\Microsoft\Internet. Explorer\Main. In right hand panel look for string "Window Title" and change its value to whatever custom text you want to see.
--------------------------------------------------------------------------------

adding content to Right click credit : ashwin C1

Once done, you will be able to right click any file or folder and use the Browse for Folder dialog to choose the location you want to move or copy your file or folder to, without having to go to the destination path.

First we will add the copy and move options to the right click menu of all FILES.
CLICK Start>Run, type REGEDIT and click OK to open up the registry editor and make your way to this key:
HKEY_CLASSES_ROOT->*->shellex->ContextMenuHandlers
Right click the ContextMenuHandlers key and choose New>Key.
Name the new key “Copy To” (without the quotes).
Repeat the above and create another new key named Move To.
You should now have two new subkeys under the ContextMenuHandlers key:
HKEY_CLASSES_ROOT->*->shellex->ContextMenuHandlers\Copy To
HKEY_CLASSES_ROOT->*->shellex->ContextMenuHandlers\Move To
Select the Copy To key and in the right hand pane, double click “Default”
Enter this clsid value as the value data:
{C2FBB630-2971-11d1-A18C-00C04FD75D13}
Next , select the Move To key and in the right hand pane set the default value to:
{C2FBB631-2971-11d1-A18C-00C04FD75D13}
This now takes care of the Copy and Move options for the right click context menu of all your files.
Now all that is left is to add the same options to the right click menu of all your folders.
The procedure will be the same as for files but at a different key:
HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHan dlers
Right click ContextMenuHandlers and create a new key named Copy To.
Right click it again and create another new key named Move To.
left click on the right hand pane, add the same default values as you did for Files:
For Copy To:
{C2FBB630-2971-11d1-A18C-00C04FD75D13}
For the Move To:
{C2FBB631-2971-11d1-A18C-00C04FD75D13}
Exit the registry and you are done.
Now when you right click on a file or folder, you should see two new options: Copy to Folder and Move to Folder

Airtel Hack for free internet

2009-07-04T08:20:00.000-07:00

these are all the tricks available !!

working too!

It cannot go beyond this!!

This write up will explain to you how to speed up your Airtel Broadband connection / solve other problems regarding connection failures due to closed ports.

Although I use Airtel and a Beetel 220 BX modem as my basis for this write up, the same rules can be applied to others as well. So lets get started. First thing make sure your DSL modem is on. Fire up your browser. Type http://192.168.1.1 as the address with the following Username/Password - Username : admin Password : password Note : These are case sensitive. Make sure all are typed in lowercase. Click on Advanced Setup -> NAT in the page that loads. If you do not see these options try entering http://192.168.1.1/main.html as the address. Some routers/modems deliberately try to prevent users from accessing these options. On the NAT virtual servers page click the add button. Now add the port number that you wish to open up. You can even open up a range of ports using the add button.

~cheers~

You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle

1) Activate Airtel Live! ( It’s FREE so no probs)

2) Create TWO Airtel gprs data accounts (yep TWO) and select the
FIRST as the active profile.

3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.

4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows

Connecting Device : Your mobile’s modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***2# / Try 99***1
Username and Password : blank

5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).

7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT

9) After a few seconds the page will start to load and you have the
WHOLE internet at your disposal. ***************************************************************************************************************

TWO

Under DATA COMM
~~~~~~~~~~~~

APN : airtelfun.com

USERNAME : blank

PASSWORD : blank

PASS REQ : OFF

ALLOW CALLS : AUTOMATIC

IPADDRESS :

DNSADDRESS :

DATA COMP : OFF

HEADER COMP : OFF

Under INTERNET PROFILES
~~~~~~~~~~~~~~~~

INTERNET MODE : HTTP or WAP (both worked for me)

USE PROXY : YES

IP ADDRESS : 100.1.200.99

PORT : 8080

USERNAME :

PASSWORD :

No Risk Here, Try it and Enjoy

Three

1st go to settings menu then to connectivity tab now choose the option Data comm. then "DATA ACCOUNTS" go to new account now the settings r as follows
ACCOUNT TYPE:GPRS
NEW ACCOUNT NAME:A1
APN:airtelfun.com
usr name: (blank)
password: (blank)

now save it
NOW!
go to Internet Setting in connectivity here choose intrnet profile--go to new profile setting are as below
NAME:A1
CONNECT USING:A1(which was created in data comm.)
save it
now u would be able to see it now selest it and take "more" option then select setting here in use proxy option it will be selected no if it is no then change it into yes
now go to proxy adress and give the adress as
100.1.200.99 and then the port number as 8080
Usr name:
password:
now save all the settings u made . come back 2 connectivity
choose streaming settings now in connect using option choose a1 that we created leave the use proxy option as no itself
THESE R THE SETTINGS
now access airtellive! from ur activated SE phone goto VIDEO GALLERY OR VIDEO UNLIMITED(varies according to states) choose live streaming then choose CNBC OR AAJTAK WHILE CONNECTING TO MEDIA SERVER cancel AFTER 9 or 10 sec then type any web adress if it shows access denied then once again select CNBC and wait for a few more sec than before if its fully connected also no prob its free then cancel it or if ur connected then stop it and the internet is ready to take of .GOOD LUCK SE AIRTEL USERS

alternate

For All Airtel Users

Requirements:
1. Airtel live (available 4 free)
2. Nokia series60 handset eg 6600,6630,n series,7610,6670 etc
3. Opera wap browser 4 mobile
Procedure:-

1. Go to ur connection settings and make a new internet profile using the default settings of airtel live. name that new profile as nething(for eg masala); change the home page of that profile to nething u like for eg www.google.com.

2. Go to ur Opera browser and set the default connection as AIRTEL LIVE. this is the original settings u received thru airtel.

3. Go to the services(in n6600) and Web(N6630) and change the default profile for connection as masala (newer one).

**Note: always make sure that ur access point is airtelfun.com

Apply:-

1. Open Opera and u will see that homepage of Airtel Live is opened. Minimize the application.

2. Now open web using the duplicate Profile and u will see that two gprs connections will work simultaneously and at the web or the services page it will show "Unable to connect" or any error. well thats the signal of ur success.

3. Simply go on the Opera with web on and open any site u want for free. No Charges No nothing.

U can also use it through ur computer..........

someone said dis too

The main principle behind this is we hav 2 fool the bsnl techies 2 activate portal and thus get gprs activated / get "G" signal on ur cell as bsnl portal (wap.cellone.in) needs "gprs signal on ur cel (whether gprs is formaly activated/registerd or not (by my method )i dont know)

NORMALLY THEY DONT DO THAT INSPITE OF THE FACT THAT THEY SHOULD ACTIVATE GPRS SIGNAL SERVICE FOR PORTAL!!!
AND THEY WILL GIVE U NO OF REASONS----
---THAT portal is message based , so go to cellone icon in menu and use that sms based portal (what the f**k)
---THAT portal service will be activated when u will activate gprs by filling up form and registering at nearest CCN!!
---THAT ur handset has some problems (if u say that "G" signal is not present)
----etc,etc!!

U HAVE 2 ACTIVATE PORTAL FIRST WHICH IS FREE AND U CAN EAT UP CC'S FOR THIS REASON!!
SO WHAT U HAV 2 DO IS--
1) SEND PORTAL to 3733 AND CONFIRMATION SHD COME WITH 5 MIN AT-MAXIMM !!
2) SEND FOR ATLEAST 20-30 TIMES (CAN B ANY MORE THAN THAT)
JUST S**K UP THE NETWORK(3733) WITH THESE MESSAGES !!!
THAT'S FREE NO!! BOTH ON POST AND PRE!!
3) NOW ALONG ALSO SEND 20-40 SMS AS GPRS TO 3733
(NO OF SMS DIRECTLY PROPORTIONAL 2 HATE FOR BSNL AND HOW EARLY U WNAN GET UR GPRS ACTIVATED) this is also free both on post and pre!!
4) U WILL GET CONFIRMATION IN BOTH CASES AND MSG TELLS U 2 GET SETTINGS FROM 9400024365, THE NO OF CC!!
HERE AT MY PLACE I CAN DIAL 9419024365 ALSO!
BOTH R TOLL FREE AND BOTH R LOCATED IN CHANDIGARH!!!
(((((((AND SOME OF THE CC'S SAY they cant give such sensitive information that where they r located, as if thay have a 3 rd world of their own! and the other dumbs said that they r in chandigarh!!!!)))))

I WOULD ADVISE ALL FIRST, 2 call them once 2 get the settings!!
(most of the times that is incorect but gives u an idea of settings in ur area))
Try and in ur 1 st call only,
talk roughly and tell them u r calling 10-20th time just for settings and is that their service!!!
5) Now when u get them save them AND plz post them here!!!
6) now GET ATLEAST 2-3 COMPLAINTS REGISTERED( each after 1 day) THAT UR PORTAL HAS NOT ACTIVATED AND GET THEIR SERIAL NO.
and in the end bombard them abt the status of all those complaints !!
b4 registering ur complaint they will hesitate much and always say taht they will b sendin new settings which r accurate! but dont belive them and just register complaints!!
6)AFTER THAT, u have 2 only wait until "G" signal is there on ur screen!!

LOOK, WHAT I HAVE WRIITEN ABV IS METHOD by which i got activated my "G" service !!! without fillin any form or such and without any money drain!!
may be since it bypasses the formal way of registeration, that is why this trick is working !!!!!!!!!!!!

U may also Try this

first open ur msg window and type LIVE and send it to 2567 so that after 5 min u get the setting of Airtel Live or if u have already no need for this procedure.
now then open that setting and copy all the settings from it and create one access point manually which has all the settings like Airtel Live has.
now only one change will be there and it would be in access point name which is "Airtelmms.com" instead of originally "Airtelgprs.com".
ok u've done it just active that setting and access free airtel gprs on ur phone.

Another Trick

somya_cse
You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle

1) Activate Airtel Live! ( It’s FREE so no probs)

2) Create TWO Airtel gprs data accounts (yep TWO) and select the
FIRST as the active profile.

3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.

4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows

Connecting Device : Your mobile’s modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***2#
Username and Password : blank

5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).

7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT

9) After a few seconds the page will start to load

main thing is the advance initialization command.

Boost Up Internet Speed Without Using Software

2009-07-02T06:11:00.001-07:00

Above 90% computers all over the world run Windows... and hence another computer trick.

FACT
But do you know that about 20% of your internet bandwidth is reserved by Microsoft.
---------------------------------------------------------------------------------------------------------
Uses of Reserved Bandwidth
** Windows Automatic Updates rely on this reserved bandwidth.
** Fast loading Microsoft Websites
** Sending Error Reports
** Online Help support in Microsoft Office
---------------------------------------------------------------------------------------------------------
But this can be recovered back...
---------------------------------------------------------------------------------------------------------
The Remedy
** Start >> Run
** Type gpedit.msc
** This opens the Policy Editor
** Now, Local Computer Policy >> Computer Configuration
** Then, Administrative Templates >> Network
** Now, click on QOS Packet Scheduler
** Now, on Right hand side
** Double Click Limit reservable bandwidth
** Now in Setting Tab

***************************************************
It says : Not Configured
Reality : The Explain Tab says "By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection"

***************************************************

** So, on Setting Tab select Enabled
** Now, change Bandwidth limit (%) to 0 (Zero)
** Click OK !!!

That's All !!!

Duplicate Folder Removal Tool..Newfolder.exe...etc

2009-06-30T05:44:00.001-07:00

What does this tool do?
This tool removes the so called : duplicated folders virus which is a very common symptom of being infected by virus IM-Worm.Win32.Sohanad.ao and friends. It removes the duplicated folders from all your hard drive partitions including floppy disks and USB flash disks (those must be write enabled during the scan process)

How to use it?
Start your computer in Safe mode and run this tool. if you have infected floppy/flash disks you can insert them and click start. you can repeat this for every disk you have.

download it from here

http://download.sergiwa.com/security/DRT.exe

ENjoy...!!!

2009-06-30T05:41:00.000-07:00

Are you Ready to use airtel Net from your mobile for free…
All u need to have is
–>PC
–>Serial/USB cable/Bluetooth dongle
–>Any Browser(I suggest Opera as we can browse both wap and other sites)

Now without wasting a minute let me jump into the actual working method

—>Activate Airtel Live sending a message MASALA ACTIVE to 121
—>Create a profile with the following settings in your data account under Data Communication

GATEWAY : 100.1.200.99
APN : airtelfun.com
USERNAME : blank
PASSWORD : blank
PASS REQ : OFF
ALLOW CALLS : AUTOMATIC
IPADDRESS :
DNSADDRESS :
DATA COMP : OFF
HEADER COMP : OFF

and then Under INTERNET PROFILES,

INTERNET MODE : HTTP or WAP (both works)
USE PROXY : YES
IP ADDRESS : 100.1.200.99
PORT : 8080
USERNAME :
PASSWORD :

–>Create a new dial-up connection on your pc after connecting the mobile to pc,using the NEW CONNECTION WIZARD as follows

ISP Name : Anyname
Phone Number : *99***1#
Username and Password : blank

–>Configure your browser to use the proxy 100.1.200.99 and port 8080.

–>Connect to the dial-up account. You will be connected at 115.2kbps

—>Now if you try to access any site on your mobile you ll get an error message like “Access Denied”

—>Open your browser, and start browsing and voila it opens the regular sites and if u beleive ull get a d/l speed of 5-6 kbps

Common Errors u Face:

If u are getting any error wile dialing a dial up connection than go to
Control panel>> Phone and modem>>>select modem and click on its properties >>advanced
and enter the following initialization commands
CODE
AT+CGDCONT=2, “IP”,”airtelfun.com”,”",0,0

It should be connected without any error now.

How to unlock or format your phone when you forgot or don’t

2009-06-30T05:39:00.001-07:00

know the phone security code.

Have you ever encountered the situation when you may want

to just lock your phone or you may want to format your

phone ? if yes then this post is for you.

NOTE: The default security code for all Nokia handsets is

12345.

So today i am going to post the way through which you can

unlock your nokia phone

There are three ways through which you can unloack your

nokia phone without knowing the security code.

Method 1. Try the default security code i.e 12345 for all

nokia phones.

Method 2. Download the java software from here and install

it on nokia java based symbian phone.

Method 3. You can also unlock your nokia phone directly

over internet by “Enter your phone IMEI number” by typing

the code in the brackets (*#06#) from this website .

So these are all the ways you can use to unlock all nokia

symbian based phone and if you want to know how to unlock

other company phones like samsung ,motorola etc.

Mobile Tips & Tricks

2009-06-30T05:36:00.000-07:00

(International Mobile Equipment Identity) Type-

*#06#

Information you get from the IMEI-

XXXXXX XX XXXXXX X

TAC FAC SNR SP

· TAC = Type approval code

· FAC = Final assembly code

· SNR = Serial number

· SP = Spare

To check the phones Software revision type-

*#0000#

Information you get from the Software revision-

V 05.31

18-02-99

NSE-3

· 1ST Line = Software revision

· 2ND Line = The date of the software release

· 3RD Line = Phone type

To enter the service menu type-

*#92702689# (*#WAR0ANTY#)

· Serial number (IMEI)

· Production date (MM/YY)

· Purchase date (MM/YY) You can only enter the date once.

· Date of last repair (0000=No repair)

· Transfer user data to another Nokia phone via Infra-Red

Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.

2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

THE REBOOT TRICK

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)

2. Make a note or reminder.

3. Enter some text into the edit box.

4. Hold "Clear" until the whole text is cleared, then press "Back".

5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)

6. Enter 4 digits (e.g. 1234).

7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).

8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

EFR CALL QUALITY

To activate EFR (Enhanced Full Rate) Enter the code-

*3370#

This improves call quality but decreases batterylife by about 5%

To deactivate it, Enter the code-

#3370#

THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

NETWORK MONITOR

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.

1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.

2. Take apart the phone.

3. De-solder the EEPROM (ATMEL AT 24C64).

4. Read out the data with an EEPROM programmer and save it to a file (Backup).

5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".

6. If you have v5.24 then change the address "0378" from "00" to "FF".

7. Write the new data to the EEPROM and solder it back to the phone,

8. Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.

· Carrier number

· MS RX Level in DBM

· Received signal quality

· MS TX power level

· C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.

· RTL (Radio link timeout).

· Timeslot

· Indication of the transmitter status

· Information on the Network parameters.

· TMSI (Temporary Mobile Subscriber Identity).

· Cell identification (Cell ID, Number of cells being used).

· MCC (Mobile country code)

· MCN (Mobile network code)

· LAC (Location area code)

· Ciphering (On/Off)

· Hopping (On/Off)

· DTX (On/Off)

· Discard cell barred information

CHECK SIM-LOCK

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.

This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.

· COUNTRY-LOCK

· NETWORK-LOCK

· PROVIDER-LOCK

· SIMCARD-LOCK

The code to read out the sim-lock status of your phone is

#PW+(MASTERCODE)+(Y)#

· # = DOUBLE-CROSS

· W = PRESS "*" THREE TIMES

· P = PRESS "*" FOUR TIMES

· + = PRESS "*" TWO TIMES

· MASTERCODE = 1234567890

· Y = NUMBER 1 TO 4

The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!

"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.

SIM-LOCK CHECKS

· #PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS

· #PW+1234567890+2# = GIVES NETWORK-LOCK STATUS

· #PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS

· #PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.

MONDAY, APRIL 21, 2008

Complete set of airtel gprs settings with airtel gprs proxy server address.

You can get the gprs settings on your phone directly from

customer care of your mobile service provider but in case

you don’t receive the settings you an simply configure fro

airtel on your mobile phone given below.

Complete set of settings for a airtel gprs activated phone.

For Airtel GPRS

Access Point:
airtelgprs.com
Server:
202 . 056 . 231 . 117
Server Port:
8080
Use Proxy:
YES
Proxy Address:
202 . 056 . 231 . 117
Proxy Port:
8080
Homepage Location:
http://techxcell.com/
Primary Name Server:
*Blank*
Secondary Name Server:
*Blank*
Username:
*Blank*
Password:
*Blank*

For Airtel Live:

Access Point Name:
airtelfun.com
Server Address:
100 . 001 . 200 . 099
Server Port:
8080
Use Proxy:
YES
Proxy Address:
100 . 001 . 200 . 099
Proxy Port:
8080
Homepage:
http://live.airtelworld.com/
Primary DNS:
*Blank*
Secondary DNS:
*Blank*
Username:
*Blank*
Password:
*Blank*

Famous Computer Viruses You Should Know About !!!

2009-06-30T05:34:00.000-07:00

BOBBIT VIRUS
Removes a vital part of your hard disk then re-attaches it. (But that part will never work again.)

OPRAH WINFREY VIRUS
Your 200MB hard drive suddenly shrinks to 80MB, and then slowly expands back to 200MB.

AT&T VIRUS
Every three minutes it tells you what great service you are getting.

MCI VIRUS
Every three minutes it reminds you that you're paying too much for the AT&T virus.

PAUL REVERE VIRUS This revolutionary virus does not horse around. It warns you of impending hard disk attack -- once if by LAN, twice if by C/:

POLITICALLY CORRECT VIRUS Never calls itself a "virus," but instead refers to itself as an "electronic microorganism."

RIGHT TO LIFE VIRUS
Won't allow you to delete a file, regardless of how old it is. If you attempt to erase a file, it requires you to first see a counselor about possible alternatives.

ROSS PEROT VIRUS
Activates every component in your system, just before the whole damn thing quits.
MARIO CUOMO VIRUS
It would be a great virus, but it refuses to run.

TED TURNER VIRUS
Colorizes your monochrome monitor.

ARNOLD SCHWARZENEGGER VIRUS
Terminates and stays resident. It'll be back.

DAN QUAYLE VIRUS #1
Prevents your system from spawning any child process without joining into a binary network.

DAN QUAYLE VIRUS #2
Their is sumthing rong wit your komputer, ewe jsut cant figyour out watt!

GOVERNMENT ECONOMIST VIRUS
Nothing works, but all your diagnostic software says everything is fine.

NEW WORLD ORDER VIRUS
Probably harmless, but it makes a lot of people really mad just thinking about it.

FEDERAL BUREAUCRAT VIRUS
Divides your hard disk into hundreds of little units, each of which does practically nothing, but all of which claim to be the most important part of your computer.

GALLUP VIRUS
Sixty percent of the PCs infected will lose 38 percent of their data 14 percent of the time (plus or minus a 3.5 percent margin or error).

TEXAS VIRUS
Makes sure that it's bigger than any other file.
ADAM AND EVE VIRUS
Takes a couple of bytes out of your Apple computer.

CONGRESSIONAL VIRUS #1
The computer locks up, screen splits erratically with a message appearing on each half blaming the other side for the problem.

CONGRESSIONAL VIRUS #2
Runs every program on the hard drive simultaneously but doesn't allow the user to accomplish anything.

AIRLINE VIRUS
You're in Dallas, but your data is in Singapore.

FREUDIAN VIRUS
Your computer becomes obsessed with marrying its own motherboard.

PBS VIRUS
Your computer stops every few minutes to ask for money.

ELVIS VIRUS
Your computer gets fat, slow and lazy, then self-destructs -- only to resurface at shopping malls and service stations across rural America.
OLLIE NORTH VIRUS
Causes your printer to become a paper shredder.

SEARS VIRUS
Your data won't appear unless you buy new cables, power supply and a set of shocks.

JIMMY HOFFA VIRUS
Your programs can never be found again.

KEVORKIAN VIRUS
Helps your computer shut down as an act of mercy.

IMELDA MARCOS VIRUS
Sings you a song (slightly off key) on boot-up, then subtracts money from your Quicken account and spends it all on expensive shoes it purchases through Prodigy.

STAR TREK VIRUS
Invades your system in places where no virus has gone before.
HEALTH CARE VIRUS
Tests your system for a day, finds nothing wrong and sends you a bill for $4,500.

GEORGE BUSH VIRUS
It starts by boldly stating, "Read my docs ... no new files!" on the screen. It proceeds to fill up all the free space on your hard drive with new files, then blames it on the Congressional Virus.

NEW YORK JETS VIRUS
Makes your 486/50 machine perform like a 286/AT.
Hitesh
LAPD VIRUS
It claims it feels threatened by the other files on your PC and erases them in "self-defense."

CHICAGO CUBS VIRUS
Your PC makes frequent mistakes and comes in last in the reviews, but you still love it.

ORAL ROBERTS VIRUS
Claims that if you don't send it a million dollars, its programmer will take it back.

O.J. VIRUS
It claims that it did not, could not and would not delete two of your files and vows to find the virus that did it.

SPEED UP UR "RAM".. PLAY BETTER GAMES...

2009-06-29T09:40:00.001-07:00

SPEED UP UR "RAM".. PLAY BETTER GAMES...

1. To speed up your windows or to increase RAM virtually,
Right click on My Computer
>> Properties
>> Advanced
>> Performance - Settings
>> Advanced
>> Virtual Memory - Change
Keep the initial size same as recommended and maximum size double of it then restart your system.
It will improve speed of windows and you can play some games which require higher RAM.

2. When a window is active, press the F11 key of the keyboard to get the biggest window possible and press F11

Hacking Paypal

2009-06-29T09:36:00.000-07:00

Here the New Trick For Hacking PayPal....
Hacking PayPal

Ever wanted a software program you had to buy online? Most of us have
and I will teach you how to do it cheap, and how to not get caught.

The Programs Are:

Mozilla Firefox
Vidalia
Privoxy
Tamper Data (Firefox Addon)
Torbutton (Firefox Addon)

Download all those programs, they can be found easily on google.

First thing first is to find a automatic Paypal system, this is very common among internet paypal sites that sell the warez that are not free.

Once you find something you want, remember the site.

Make a paypal account now, a new one even if you do have a old one, I would prefer to proxy all accounts you make and all accounts you log into just for safety reasons. To do this:

Run Vidalia, Start It
Run Privoxy, it will be in you notification area
Start Mozilla and at the bottom right hand corner you should see Tor Disabled in red letters, meaning you downloaded Torbutton correctly, just click the red letters once and they will turn green saying Tor Enabled, now your anonymized.

Create a account on paypal now, link it to your bank account, or use a Visa Giftcard, which is probably the safest way since I have yet to find a way to register a fake bank account to verify my account so I can use money. If you do find a way to make a fake bank account please tell me, but once someone figures out a safer way to do this step, you are going to have to take a risk of your paypal scam being linked to your bank account.

If the site that has your awesome **** on it requires registration to buy there items, also do this behind the proxy. Once you are logged in (if required) and you see the item you want with that tempting "Add to Cart" button, go to "Tools" and at the very bottom should be your addon Tamper Data. Run this, and click Start Tamper. Now go back to your site and click "Add to Cart" you should recieve popups from Tamper Data that give 3 Options, Tamper, Submit and Abort. Just click Tamper on every single cookie after you click "Add to Cart", because every online store sends the cookie with the info you need at different times. I have seen some that send it at the very end of checking out, so click Tamper on every cookie that you receive, until you see one cookie that stands out with way more parameters than any cookie you have seen so far, unless it was your first cookie of course. The cookie with tons of parameters, will have a parameter named "Amount" and the amount next to it should be the amount you paid in dollars, now just edit this parameter from whatever amount it was previously to 0.01

All the cookies after this can be submitted or you can stop Tamper Data, no cookies after this need to be viewed. Now once you hit whatever button on your site that is equal to Check Out that brings you to Paypal you will see on the Paypal site the amount has changed to 1 penny. Every single automatic service donation site item will now cost you a penny, I use a vista giftcard on my paypal account, so 100 dollars on a gift card is pretty much = to 1000 items you want for 1 penny.

SECRET MOBILE CODES

2009-06-29T09:19:00.000-07:00

SECRET MOBILE CODES

Here is the important codes for the mobile devices.
Note that all codes does not works in all mobile devices.
Most of the given codes are for NOKIA phones.

FOR FORMAT

*#7370#
To Format ur phone (series 60,80)
After entering this code phone will ask LOCK CODE. It is 12345 for NOKIA.
After entering lock code phone will be restarted and phone memory will be deleted.

PLZ REMOVE UR MEMORY CADR BEFORE FORMATING IT

*#7780#
It is same as above code.
But it is for soft format.

(* and 3 and call key and power key at a same time.)

By this code ur phone will be Hard Formated.

FOR WALLET

*#7370925538#
It is for WALLET.
If u forgot ur WALLET CODE than by this code it will be deleted and u than have to enter new code.

GENERAL INFO

*#0000#
It shows software version.

*#06#
It shows IMEI code.

DIFFRENT LOCK STATUS'S

#Pw+1234567890+1#
It shows provider lock status.
Use button "*" to enter p and w and + sign.

#Pw+1234567890+2#
It shows network lock status.

#Pw+1234567890+3#
It shows country lock status.

#Pw+1234567890+4#
It shows sim card lock status.

DIVERTS

*#21#
It shows all calls divert to numbers.

*#30#
It shows private numbers.

*#43#
Shows call waiting status.

*#73#
Repets game scores.

12345
Its a default code of Nokia.

*#2820#
will show Bluetooth device address.

GOOGLE SEARCH TIPS

2009-06-29T09:16:00.000-07:00

You can make your search more efficient by learning some search basics !

Try these tips :
1. Use Of '+' sign :
This ensures that the results returned to you will definatly consist of the word following the '+' sign. For Eg :
Search: reviews of +iPhone and iPod
This will show results containing the word reviews or iPod but the results will definatly consist of iPhone !

2. Use Of '-' sign :
Using '-' sign before any word will ensure that the particular word will not be included in the results !

3. Use Of '~' sign :
Using '~' before any word will return the results also containing the synonyms of the word !

4. Search a particular site :
To search a particular website you can use the following syntax in the google search :
Search: site:www.xyz.com abc
For Eg :
Search: site:http://trickscafe.blogspot.com/ Google Search Tips

5. Define a word :
To get the definition of a word just use :
Search: define:abc
For Eg : Search: define:Computer
This will return you results which define 'Computer'.

6. Find Pages similar to a page :
To find a page similar i.e. consisting of same type of content, use the following syntax :
Search: related:http://www.xyz.com/

7. Search for exact phrase :
To search a set of words exactly together i.e.
For Eg :
Search: "contact us"
This will return the results containing both contact and us together !

8. Using the wild card '*' :
The * sign can be used in places where the whole word is not known.
For Eg:
Search: friend*
This will return the results containing friend , friends , friendship.

9. Using the '?' sign :
This is used when the full spelling of the word is not known.
For Eg:
Search: fri??d
This will result that in the results in which any alphabet can take the place of '?' sign.

10. Use of boolean operators :
The boolean operators like AND,OR,NOT can be used in search box to connect the words !
The search engine understands them as what they mean but the must be in capital letters !
For Eg:
Search: swim OR float
This will return the results containing either swim or float !

Send free sms to mobile from your pc

2009-06-29T00:20:00.000-07:00

https://zyb.com/
http://www.mobyko.com/
http://stepsms.com/
http://www.smstxtbox.com/web/
http://www.junglesms.com/
http://50sms.com/
http://www.ecosms.ch/
http://www.free–sms.com/index.go
http://www.pimpmysms.com/
http://www.islamweb.net/
http://www.phones.com/
http://www.devinosms.com/
http://gsms.se/
http://www.themobiweb.com/en/sms.html
http://my.phonegnome.com/
http://sms4u.biz/signup.php
http://simsor.com/register
http://www.mobik.com/mobik/client/
http://www.smsdiscount.com/en/index.html
http://4usms.net/
http://www.sendsmsnow.com/
http://www.unisms.uni.cc/
http://www.atrochatro.com/
http://www.gsmvault.com/
http://smscity.com/

http://sms7.in
http://www.sms2india.org/
http://www.freesms.web.tr.tc/
http://www.d1g.com/
http://thesmszone.com/
http://zyb.com/
http://www.vazu.com/
http://www.sms.ac/
http://www.agentsms.com/
http://www.mobizone.com/
http://www.yellowpages.com.eg/
http://www.boswtol.com/
www.masrawy.com/sms
http://www.resalh.com/
http://free-sms-message.com/index.htm
http://adleel.com/sms.htm
http://mobile.fares.net/sms/uae
http://www.itsalat.com/
http://www.quios.com/
http://www.clickatell.com/
www.ulluminati.ch/Nexus/sms.html
http://www.freesms.net/
http://www.free-sms.com/
http://www.lycos.co.uk/
http://www.sms.at/
http://www.sms.com/
http://www.smsyes.com/
www.smsuae.com/sms-uae
http://www.edihasms.com/
http://www.shortmessage.com/
www.worldxs.net/sms.html
www.hot.it/sms

www.sms7.in

www.160by2.com

www.way2sms.com

Top 10 Obscure Google Search Tricks

2009-06-29T00:12:00.000-07:00

When it comes to the Google search box, you already know the tricks: finding exact phrases matches using quotes like "so say we all" or searching a single site using site:lifehacker.com gmail. But there are many more oblique, clever, and lesser-known search recipes and operators that work from that unassuming little input box. Dozens of Google search guides detail the tips you already know, but today we're skipping the obvious and highlighting our favorite obscure Google web search tricks.

Get the local time anywhere

2009-06-29T00:09:00.000-07:00

What time is it in Bangkok right now? Ask Google. Enter simply what time is it to get the local time in big cities around the world, or add the locale at the end of your query, like what time is it hong kong to get the local time there.

Track flight status

2009-06-28T09:15:00.000-07:00

Enter the airline and flight number into the Google search box and get back the arrival and departure times right inside Google's search results.

Convert currency, metrics, bytes, and more

2009-06-28T09:13:00.000-07:00

Google's powerful built-in converter calculator can help you out whether you're cooking dinner, traveling abroad, or building a PC. Find out how many teaspoons are in a quarter cup (quarter cup in teaspoons) or how many seconds there are in a year (seconds in a year) or how many euros there are to five dollars (5 USD in Euro). For the geekier set, bits in kilobytes (155473 bytes in kilobytes) and numbers in hex or binary (19 in binary) are also pretty useful.

Remove affiliate links from product searches

2009-06-28T09:11:00.000-07:00

When you're sick of seeing duplicate product search results from the likes of eBay, Bizrate, Pricerunner, and Shopping.com, clear 'em out by stacking up the `-site:ebay.com -site:bizrate.com -site:shopping.com` operator. Alternately, check out Give Me Back My Google (original post), a service that does all that known reseller cleaning up for you when you search for products. Compare this GMBMG search for a Cruzer 1GB flash drive to the regular Google results.

Find related terms and documents

2009-06-28T09:10:00.000-07:00

Ok, this one's direct from any straight-up advanced search operator cheat sheet, but it's still one of the lesser-used tricks in the book. Adding a tilde (~) to a search term will return related terms. For example, Googling ~nutrition returns results with the words nutrition, food, and health in them.

Find music and comic books

2009-06-28T09:08:00.000-07:00

Using a combination of advanced search operators that specify music files available in an Apache directory listing, you can turn Google into your personal Napster. Go ahead, try this search for Nirvana tracks: -inurl:(htm|html|php) intitle:"index of" +"last modified" +"parent directory" +description +size +(wma|mp3) "Nirvana". (Sub out Nirvana for the band you're interested in; use this one in conjunction with number 7 to find new music, too.) The same type of search recipe can find comic books as well.

Make Google recognize faces

2009-06-28T09:06:00.001-07:00

If you're doing an image search for Paris Hilton and don't want any of the French city, a special URL parameter in Google's Image search will do the trick. Add &imgtype=face to the end of your image search to just get images of faces, without any inanimate objects. Try it out with a search for rose (which returns many photos of flowers) versus rose with the face parameter.

ID people, objects, and foreign language words and phrases with Google Image Search

2009-06-28T09:04:00.000-07:00

Google Image search results show you instead of tell you about a word. Don't know what jicama looks like? Not sure if the person named "Priti" who you're emailing with is a woman or a man? Spanish rusty and you forgot what "corazon" is? Pop your term into Google Image Search (or type image jicama into the regular search box) to see what your term's about.

Interesting stuffs

Speed up ur Firefox Mozilla

Boot your PC in less than 10 seconds

How to bootup computer in 10 seconds lesser?

Adding Safe Mode to Your Boot up Screen

Sensational Trick part 1

Create a Hidden User Account

E-mail Tracking

How to use a trial software forever legally

Restrict PC Shutdown

Top Tricks n Cheats

This Is crazy!!

Set Processes Priority

Shutdown Trick !

Crazy !!

Hide ur folders.. never known trick !!!!!!!!!! Disguise them to "Recycle Bin"

System information

lock pc just by double clicking mouse

SPEED UP UR ACROBAT READER (ALMOST LIKE NOTEPAD)

Remove Stored username and Passwords !

Remove the Username and picture from Windows XP New Start Menu

To get back the username and the picture, reverse the above procedure.

Notepad Trick ! for complete list move to NOTEPAD TRICKS page !!

NOTEPAD "world trade centre trick".. :Rahul

log trick !! make ur Notepad a diary !!

WHY?

SPEED UP MENU DISPLAY.!!

CLICKING * .AVI FILES ON EXPLORER CAUSING 100% CPU USAGE.!!

CD ROM STOPS AUTOPLAYING/AUTORUN.!!

How to make your Desktop Icons Transparent

DISPLAY MESSAGE ON STARTUP.

AUTO DELETE TEMPORARY FOLDER.!!

make ur pdf files to speak

Crack CD Protection

shtcut to restarting xp..

1) Disabling Display of Drives in My Computer :

2) Pop a banner each time Windows Boots :

3) Great trick Lock ur PC yourself

4) Deleting System Options from the Start menu :

5) Cleaning Recent Docs Menu and the RUN MRU :

6) Can u Delete Recycle Bin?

7) To change the icons used for specific drives in explorer

8) Hacking windows SEND TO MENU

9) How to remove the shortcut arrow from the desktop ?

10) The Complete list ! Can u Do it!

TURN NUMLOCK ON AT LOGON.!!

REMOVING SERVICES DEPENDENCIES.!!

TURN ON UR PC IN JUST 10 SECONDS

Xp Tricks Contd.. More of Dem

Make your folders invicible...:)

Easily Disable Messenger

Turn Off Autoplay for Program CDs

Change Drive Letters in Windows XP

Do Not Highlight Newly Installed Programs

Change the Default Opening Folder in Windows Explorer

Close Multiple Windows

change fat -> ntfs

Xp problems and their solutions

There is One for Everyone !!

2)I don't have IIS( Internet Information Services) windows componet on my system

3) Folder Option Vanished

4) My volume icon is not showing in taskbar, Yet It's Enable From Control Panel > Sound And devices

5)Whenever i try d'loading stuff from the net, the download starts and the comp just restarts. due to dis i have to install d'load managers wich i hate. help needed anyone. i have win xp!

6)I accidentally deleted the Show Desktop icon which sits normally on the bottom left hand corner of the Taskbar. How do I restore the icon?

Speed up Booting Xp by 61 Times

run -> msconfig - Hit Enter

Stopping Unneeded Startup Services !

Caution:

SPEED UP BOOT BY DISABLING UNUSED PORTS.!!

Do Dis !!

Automatic Updates !

Tip !

Disabling Recent Documents History !

Disabling the Boot Logo !

Removing Unwanted Fonts !

Tip:

Stopping Remote Assistance and Remote Desktop Sharing !

Speeding Up the Dual-Boot Timeout !

Speeding Up Your PPPoE Connection !

Reducing the Wait Time

CLICKING .AVI FILES ON EXPLORER CAUSING 100% CPU USAGE.!!*